'69 THM400 coolant lines bracket?
 

Fast question for original '69 SHP ( Camaro, Chevelle, Nova,
Impala ) owners with THM400. Did this bracket come stock on
all such cars? I found one on a '69 Caprice with the odd
396-2bbl combination years ago, but don't know if it is correct
for other BBC cars as well.

For reference, this mounts on the right side of the oil pan
( uses one oil pan bolt ) and I believe it is ahead of the
right side motor mount.

Any ideas https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Steve

http://webzoom.freewebs.com/nuch_ss3...s_bracket1.jpg

Re: '69 THM400 coolant lines bracket?
 

Hi Steve:
68 full size used it for sure and I have also taken them off 69's.There does not seem to be any difference according to the parts book for small block vs big block, PG vs TH400. They refer to it as a line spacer.On the 68's and 69 full size it mounts like you said on the right side in front of the starter but before the engine mount.
Have no Chevelle auto's but seem to recall it being there also.
Take care
Joe

Re: '69 THM400 coolant lines bracket?
 

Thanks Joe!

Anyone else have opinions?

Steve

Re: '69 THM400 coolant lines bracket?
 

Yes,

This is also correct for 69 Chevelle,Camaro BB and SB with automatic trans. Without looking at the book, it might also be correct for full size.

Phil Woj.

Re: '69 THM400 coolant lines bracket?
 

I need one of those.........PLEASE!!!!!!!!!!!