Cannister Filters
 

Anyone have any tips........My cannister filter assy on the 66 is dripping........I took it off , added a new Filter and Gasket and it still dripped.......I had another Cannister, so I changed the Cannister, Gasket, and filter again and it still drips.........any advice.....

Thanks
Ken

Re: Cannister Filters
 

Yeah, dont look under your car anymore. https://www.yenko.net/ubbthreads/imag...ns/naughty.gif

But serioulsy folks, there is also an O-ring or sealing washer that goes under the long bolt I believe. That never gets replaced and always drips.

Re: Cannister Filters
 

[ QUOTE ]
it still drips.........any advice.....

Thanks
Ken

[/ QUOTE ]

https://www.yenko.net/ubbthreads/imag...mlins/haha.gif https://www.yenko.net/ubbthreads/imag...mlins/haha.gif Depends! https://www.yenko.net/ubbthreads/imag...mlins/grin.gif

https://www.yenko.net/ubbthreads/imag...lins/blush.gifOops! I mean, it depends on where the drip is. https://www.yenko.net/ubbthreads/imag...mlins/wink.gif Like Steve said, the gasket around the bold is likely the culprit, but you could also check the "O" ring up inside the block. Maybe there's something between the machined surface and the "O" ring. https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Re: Cannister Filters
 

I forgot to mention that this is on the Rebuilt Engine that just went back in the Chevelle......Didn't leak before..Noticed it right after start up, not much ....just a couple of drips.......It's not coming from the Oil Pressure port...Bone dry there, but I can see where the drip ran down the Outside of the Cannister???????
Maybe I should take the filter adaptor out of the Block and change the Gasket there, but I think the Cannister Gasket bulges out and seals the outside of the Cannister also?????


Ken

Re: Cannister Filters
 

Ken,
Is there a check/by pass valve in the adapter?

Re: Cannister Filters
 

Yep!!!!!

Re: Cannister Filters
 

How much oil pressure you running??

Re: Cannister Filters
 

Crack in the cannsiter/adaptor? Double gaskets by accident? Just mentioning the "duh" items.

Re: Cannister Filters
 

[ QUOTE ]
How much oil pressure you running??

[/ QUOTE ]

Stock Pump.......Gonna pull it apart tonight and look at everything closer........

Ken

One of these days I'll have a car that doesn't leak oil................

Re: Cannister Filters
 

Me soon as I sell my FORD!!! https://www.yenko.net/ubbthreads/imag...mlins/haha.gif https://www.yenko.net/ubbthreads/imag...mlins/haha.gif https://www.yenko.net/ubbthreads/imag...mlins/haha.gif https://www.yenko.net/ubbthreads/imag...lins/beers.gif