|
1963-64 409 400 HP 3844463 intake
1 Attachment(s)
3884463 intake dated 8/26/63 for a 409 400 HP engine.
Plenum divider has been milled out, but doesn't appear to have ever been ported. It does have some external corrosion on the drivers side at the crossover passage. Thermostat area is solid. No heat shield, 2 of the old shield rivets need to be drilled out if you want to re-install a shield. How about $250.00 and I'll cover the ride (48 states only) for paid sYc members. Non-paid members pay $25.00 flat shipping (48 states only). Here's a few pics. https://www.yenko.net/attachments/250392-DS.jpg |
Re: 1963-64 409 400 HP 3884463 intake
1 Attachment(s)
|
Re: 1963-64 409 400 HP 3884463 intake
1 Attachment(s)
|
Re: 1963-64 409 400 HP 3884463 intake
1 Attachment(s)
|
Re: 1963-64 409 400 HP 3884463 intake
1 Attachment(s)
|
Re: 1963-64 409 400 HP 3884463 intake
1 Attachment(s)
|
Re: 1963-64 409 400 HP 3884463 intake
1 Attachment(s)
|
Re: 1963-64 409 400 HP 3884463 intake
I really dig that "pink lighting" thing you do...very 60's!!
wilma https://www.yenko.net/ubbthreads/imag...lins/beers.gif |
Re: 1963-64 409 400 HP 3884463 intake
I think it's the camera doing that, I'm definitely not doing it on purpose. https://www.yenko.net/ubbthreads/imag...lins/dunno.gif
My lighting could be a LOT better too. Eric |
| All times are GMT. The time now is 09:06 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.