New over the counter 427 L88 shortblock & heads
 

Brand new service package off road 427 L-88 short block with 1978 casting date.
Complete short block assembly PN 3970699 consisting of:

Block (4 bolt mains with caps and cap screws) casting no. 361959
Forged steel Crankshaft
L88 mechanical camshaft
Forged connecting rods (complete)
Forged aluminum open chamber pistons 12.5:1 (complete) 3947886
Timing gears
Double roller timing chain
Timing chain cover

Additional short block items in original GM boxes not installed on above short block assembly:

Harmonic damper 396/402/427 8” diameter 3879623
ZL-1 oil pump assembly (1.3” gears) for standard pan 3969870
Corvette oil pan with trap door 5 quart 3977591

Brand new pair NOS 1969 GM open chamber, rectangular intake port, square exhaust port, 2.19” intake, 1.88” exhaust 6272990 manufactured in 1978. These heads are the cast-iron version for use with 12.5:1 open chamber pistons, latest revision with 118cc chambers used on the 1969 L88 engines.
Heads are complete assemblies with valves, valvesprings, valve retainers, rocker studs, pushrod guides, etc. except for items listed below.

Additional valvetrain items in original GM boxes/packaging separate from head assemblies:
Rocker arms 3959182
Pushrods 3942415
Pushrods 3942416
Mechanical lifters 5232695

All items listed were bought brand new and have never been used.

I will sell everything listed for $5,000.
Shipping or pickup buyers responsibility. I can deliver to you if it is within a reasonable distance from me.


I am located in St. Louis, Missouri.
If you have any questions, need my telephone number, want to see pictures, or want to physically see what I have, please email me at:
[email protected]

Re: New over the counter 427 L88 shortblock & heads
 

Ill take it...thanks Sent pm also

Re: New over the counter 427 L88 shortblock & heads
 

Note to self to stay up late and to spend more time on the computer.

Re: New over the counter 427 L88 shortblock & heads
 

...the best thing happen at nite https://www.yenko.net/ubbthreads/imag...lins/drool.gif

wilma

Re: New over the counter 427 L88 shortblock & heads
 

I don't understand why, as a restorer anyway, that "we" would want a 1978 dated engine. https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

As a drag race engine, I guess it's worth it. JMO

Re: New over the counter 427 L88 shortblock & heads
 

Everything SPF.

Re: New over the counter 427 L88 shortblock & heads
 

[ QUOTE ]
I don't understand why, as a restorer anyway, that "we" would want a 1978 dated engine

[/ QUOTE ] Rick, you have to look at it this way. Would you rather have a GM crate L88 AND 1000.00 to buy some aviation fuel, or 2 used fan/clutches for a 68 camaro??!! https://www.yenko.net/ubbthreads/imag...mlins/grin.gif https://www.yenko.net/ubbthreads/imag...mlins/grin.gif

Re: New over the counter 427 L88 shortblock & heads
 

Ha Ha, You're cracking me up. https://www.yenko.net/ubbthreads/imag...mlins/haha.gif

But seriously, are you using the engine to race, or does it have value as something to put into a restoration?
https://www.yenko.net/ubbthreads/imag...s/confused.gif

I guess I'm just surprised to see you have interest in this engine, when I see almost everything else you deal in has to do with the restoration end.

Re: New over the counter 427 L88 shortblock & heads
 

Rick here is your quote from the other day.
Quote:
--------------------------------------------------------------------------------

have a later production one that was built in 1989. It also has "XCH" stamped above the timing cover.




--------------------------------------------------------------------------------

So if you tell me why you bought yours, ill tell you why i bought mine https://www.yenko.net/ubbthreads/imag...mlins/grin.gif Actually,i will use it in one of my cars as its not anything #s or valuable comparitively speaking ,and save the dated pieces . Im going to put a 68 fan and clutch on it though just to make everyone mad at the camaro nationals.. ... https://www.yenko.net/ubbthreads/imag...mlins/grin.gif

Re: New over the counter 427 L88 shortblock & heads
 

[ QUOTE ]
Actually,i will use it in one of my cars as its not anything #s or valuable comparitively speaking ,and save the dated pieces . Im going to put a 68 fan and clutch on it though just to make everyone mad at the camaro nationals.. ... https://www.yenko.net/ubbthreads/imag...mlins/grin.gif

[/ QUOTE ]

https://www.yenko.net/ubbthreads/imag...mlins/haha.gif https://www.yenko.net/ubbthreads/imag...mlins/haha.gif https://www.yenko.net/ubbthreads/imag...mlins/haha.gif