70 L78 throttle cable bracket..
 

Does anyone have a photo of a 70 L78 throttle cable bracket. All my handy photos have the air cleaner in place. Trying to help out another Nova guy.

Rick P.????


thanks, wilma

Re: 70 L78 throttle cable bracket..
 

Check an online catalog, maybe D&R?

Re: 70 L78 throttle cable bracket..
 

I'll trade ya for a jpeg of that CW trans tag..
Let me charge up my camera batteries. https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

Re: 70 L78 throttle cable bracket..
 

Is it the same as the L78 Camaro bracket? If so, I'll take a picture of mine after work.

Re: 70 L78 throttle cable bracket..
 

The 1970 L-78 Camaro used a different bracket.
Nova & Chevelle L-78's were the same.

Re: 70 L78 throttle cable bracket..
 

[ QUOTE ]
I'll trade ya for a jpeg of that CW trans tag..
Let me charge up my camera batteries. https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

[/ QUOTE ]

Guilty as charged.... https://www.yenko.net/ubbthreads/imag...ns/worship.gif

wilma

Re: 70 L78 throttle cable bracket..
 

http://i36.photobucket.com/albums/e4...hrottlebkt.jpg
http://i36.photobucket.com/albums/e4...eythrottle.jpg

Do these look like the correct throttle bracket?

Re: 70 L78 throttle cable bracket..
 

That bracket above is a 1970 Camaro Holley equipped application..i.e. LT-1 & L-78.
That one looks like the much later issued #814 bracket,as compared to the original
design #982 bracket with the wider offset.

Here is the Nova-Chevelle #619 L-78 & LS-6 bracket.
Pictures were featured here last year in a topic by P.J.of their different variations.
https://www.yenko.net/attachments/134786-3brackets.jpg

Re: 70 L78 throttle cable bracket..
 

1970 L-78 & LS-6 brackets again,courtesy of P.J.
https://www.yenko.net/attachments/134787-2brackets.jpg

Re: 70 L78 throttle cable bracket..
 

Yes Peter
There is a difference in the 619 brackets for the L78 VS the Ls6 brackets. In the reaserch I did a year ago I found out after looking at about 15 cars that were origional cars documented that the bracket on the right of the 3 brackets
is the L78 bracket. And the 2 on the left are ls6 cars.
I did not find any l78 cars with the ls6 bracket.I dont know why the brackets are differnt with the same part number
As you can see some numbers are deeper than others,thats because
the die that struck the brackets were sharpened and the
bump lock on the die was not ground the same amount to offset the new die punch heigth.The differnce is in the locking tab area.
I am including a pic of the real L78 bracket for the 70 chevelle.
Peter