The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Technical & Restoration (https://www.yenko.net/forum/forumdisplay.php?f=86)
-   -   T.C.S. relay (https://www.yenko.net/forum/showthread.php?t=85565)

Donnie 02-24-2006 09:12 AM

T.C.S. relay
 
anyone know what kind of rivets are used to hold the T.C.S. relay to the wire gutter?
and where can you get them.

thanks Donnie

YENKO DEUCE REGISTRY 02-24-2006 05:56 PM

Re: T.C.S. relay
 
Yes, Gregg at Nova Research Group has them.

Donnie 02-24-2006 07:41 PM

Re: T.C.S. relay
 
Thanks Marlin,
is there a web site for them or phone number?

Donnie

Mr70 02-24-2006 07:56 PM

Re: T.C.S. relay
 
You can contact Greg Roberts at:
http://www.chevynova.org/index.html

SS427 02-24-2006 09:16 PM

Re: T.C.S. relay
 
Rivets
Page down near the bottom.
Rick

SS427 02-24-2006 11:37 PM

Re: T.C.S. relay
 
I have received several e-mails and there is a little confusion regarding these rivets. Chevelle used two different types, the pan head head style and the hollow through type. AMK does have have the pan head style but not the hollow type. I had seen the hollow type at Home Depot several years ago but have not looked since then. They do require a special tool to crimp them over. I would suspect that some upholstery type stores may also carry them. Rick

Nova Research Project 02-26-2006 06:58 AM

Re: T.C.S. relay
 
SS427;

Is this what you are looking for?
http://www.chevynova.org/images/3961573withrivets.gif

This is a steel pan head tubular rivet. AMK has Aluminum rivet that is similar.

Use a tubular rivet set to roll the edge over.

Greg R.


All times are GMT. The time now is 04:14 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.