M-22 Italian gear sets
 

Has anyone used or have any information on the M22 gear sets made in Italy? I am considering converting a spare M-21 to this configuration. Thanks for the help.

Re: M-22 Italian gear sets
 

I have heard nothing but good things about those gear sets and have a friend that runs high tens with a set in his '55. The trick that everybody seems to be doing is going with the rockcrusher gear set in the 2.5 ratio instead of the 2.20. It's supposed to be good for a solid two tenths in the quarter over the 2.20 set. Two tenths is two car lengths and we've all won or lost races by two car lengths, right?

Re: M-22 Italian gear sets
 

Bill...I talked to Crash on the phone yesterday about the gears. I suggest you talk to him before you make a decision.The man knows Muncies.

Re: M-22 Italian gear sets
 

I just learned of the 2.5 1st gear today on these M-22 gear sets, which is one of the reasons I want to run them. Up until now i thought they were the original 2.20 1st gear only. I don't know who Crash is. If I do this swap I think I am going to use a local guy who has a few of his customers running the Italian gear sets with good results. I am going to stick with someone local (CT) as shipping a trans is a problem

Re: M-22 Italian gear sets
 

WHER DO YOU BUY THE PARTS NEEDED??

Re: M-22 Italian gear sets
 

I put them in my M-22...they were cost effective as I needed first and third gear=$$$ Ed Hartnett in Pa did the job...he speaks highly of them.

ALbert

Re: M-22 Italian gear sets
 

Is there a website i can go to or who do i call?

Re: M-22 Italian gear sets
 

Bill...Crash is a member here. He has built some of the members transmissions.

Don...I don't know of a web site. You can email Crash for his number if you want to talk to him.

Re: M-22 Italian gear sets
 

Don try e bay..they usually have tons on Muncie stuff listed.

Re: M-22 Italian gear sets
 

I got my parts here. http://www.autogear.net/index.htm

They stock everything...

Mike