Aluminum trim restoration
 

Anyone have a recommendation on a very good aluminum trim re-anodizing shop ? Need to do some side moulings...

Re: Aluminum trim restoration
 

Bob
Have you heard of this company?
http://www.anobrite.com

Re: Aluminum trim restoration
 

No Bruce...have you used them ???

Re: Aluminum trim restoration
 

The single best product EVER produced!
Brooklyn Ball Buster Aluminum Polish...
You can find it at www.skspeed.com

I have never used a better product!

Re: Aluminum trim restoration
 

Need to strip the old anodizing off...fix a door ding and re Brite Dip them...

Re: Aluminum trim restoration
 

I had Anobrite do a couple samples for me some years back on broken or otherwise scrap 70 Camaro Window Reveal Moldings. I can tell you the Brite Dip came out fine. I sent them pieces of molding that I had polished by someone local to myself. When I got back one of the samples, some small pitting showed, that the brite dip process exposed, after the polishing had apparently restructured the surface and only covered or hid the pits....Maybe somebody else will/can explain.....or better yet MARCO at Ano-Brite
Bob , seems to me ads in Hemmings Motor news show Brite Dip vendors that might be closer to you than Calif?????

Chuck

Re: Aluminum trim restoration
 

No I haven't used them yet.

Re: Aluminum trim restoration
 

Here is a place that sells a kit to strip and reapply the anodizing.

http://www.caswellplating.com/kits/aluminum.htm

Re: Aluminum trim restoration
 

Thanks Chuck...I will have to call him.

Re: Aluminum trim restoration
 

Thanks Chuck...I forgot the name of the guy I used for my 62..I thought he was in Indiana..I will call Marco