The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Supercar/Musclecar Discussion (https://www.yenko.net/forum/forumdisplay.php?f=79)
-   -   69 z28 block 010 CE (https://www.yenko.net/forum/showthread.php?t=80888)

2qwik2c 04-12-2005 03:39 AM

69 z28 block 010 CE
 
Hey guys there's an add in the local paper here for a 69 Z28 010 CE block, with original crank and the pink rods. Crank is 20/20 with new bearings and the bores are standard and in good condition. But there are a couple hair line cracks in the lifter valleys that need to be repaired. The price is $1500.00 CDN. Is this a good deal??? .2qwik2c.

Pantera 04-12-2005 03:51 AM

Re: 69 z28 block 010 CE
 
A hair like crack in the lifter valley would be about like having a hairlike crack in your head if you bought it.

Bad news. A CE block is a replacment motor and did not come from the factory in a Z-28 either. I would be very carefull with that one.

Pantera

2qwik2c 04-12-2005 04:55 AM

Re: 69 z28 block 010 CE
 
I'll pass on it then. Thanks for the help.

YENKO DEUCE REGISTRY 04-12-2005 04:19 PM

Re: 69 z28 block 010 CE
 
Don't touch it unless it's free, even the crank is suspect being cut 20/20.


All times are GMT. The time now is 06:20 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.