copo date question????
 

hey guys what is the latest date/vin# you have seen on a 69 copo camaro??? thanks for any input. https://www.yenko.net/ubbthreads/imag...mlins/flag.gif

Re: copo date question????
 

10D N703336

Re: copo date question????
 

Mine is a 10E car, and you can add about 6000 to the VIN on the car VIN you have shown.
there were only 2296 approx that rolled off the line in 69 after my car.
considering they made 500-700 a day, mine was about 3-5 days before shutting down the line.
i have yet to find a 69 copo that has a VIN after mine.
i have located one car that is 14 away from mine, but mine is still the latest one i can find.
mine has,original engine,trans and rear BE.

Re: copo date question????
 

Hi Bill,I always thought my all original documented brown copo 703336 was the last built, but who knows? I have never seen a later built

Re: copo date question????
 

The latest documented Copo Camaro found so far is also 10E built, N7097XX.

Re: copo date question????
 

hi
id love to see photos of this copo, or at least the vin?
please let us all know
thanks again.

Re: copo date question????
 

how about 11a body#155xxx pnt65 tr711 x-44 d-80 old kc spurlock car?

Re: copo date question????
 

I thought Spurlocks car was the Burnished Brown LA built car ?

Re: copo date question????
 

yes i checked my notes and there is a question mark next to the spurlock part, i wonder if anyone knows?

Re: copo date question????
 

ok guys diffrent subject here:
i have a 427 camaro, i cant seem to find the smaller power steering bracket, it bolts to the front exhaust manifold bolt(drivers side) and the bottom bolt, bolts to the block.
wellllll
they sell 2 different shapes of brackets, all people tell me there the same. well they dont look like it to me, one is in an "S" shape and the other is in a straight line, the bolts are offset for the "S" shape bracket, the straight bracket has the bolts inline, the straight one appears it wont work for my car.
mine is i think a long water pump type.

so what do you do? look on tamraz's camaro parts site, it shows one set of brackets and next to it, they show another set? my question is, what does the factory bracket look like? this is what i truly want to know.
anyone out there in camaro land know?
im waiting for a response.
thanks guys
ron