The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Parts/Memorabilia - Wanted (https://www.yenko.net/forum/forumdisplay.php?f=84)
-   -   carb heat shield.... (https://www.yenko.net/forum/showthread.php?t=77769)

WILMASBOYL78 07-18-2004 11:57 PM

carb heat shield....
 
Does anyone know if the metal heat shield that was used under Holley carbs is still available form GM or would I need to locate a used one. Thanks, Tom

Steve_Hoog 07-19-2004 12:21 AM

Re: carb heat shield....
 
I don't know if it's what you want but GM did have an aluminum shield for both straight bore and spread, if it is what your looking for I will try to get you the numbers Monday at work.

WILMASBOYL78 07-19-2004 12:26 AM

Re: carb heat shield....
 
That sounds like what I am looking for. Used to get these years ago from the local Chevy dealer. let me know what #'s you come up with. Many Thanks. TW

Steve_Hoog 07-19-2004 12:27 AM

Re: carb heat shield....
 
They have two gaskets stapled to the plate and firing order stamped, they were very cheap. I may still have one around the shop if they are discontinued

WILMASBOYL78 07-19-2004 01:18 AM

Re: carb heat shield....
 
Sounds good let me know. How about a SW or Sun tach(see post)??? Thanks,Tom

mssl72 07-19-2004 04:55 AM

Re: carb heat shield....
 
I did order one from GM a few years ago for my big block/Holley set-up. They call it an insulator assembly or "INSUL ASM". Group #3.726 in the parts books. The part number on the one I have is 3969835. If this same one would work for your application, try calling a dealer and see if it's still around.

WILMASBOYL78 07-19-2004 06:20 AM

Re: carb heat shield....
 
I will check it out tomorrow.Thanks.TW https://www.yenko.net/ubbthreads/imag...ins/3gears.gif

Steve_Hoog 07-19-2004 06:19 PM

Re: carb heat shield....
 
Tom
I couldn't verify that the number Mark gave was correct, I had trouble figuring out where I found the numbers. I think I got them out of a magazine years ago and then found them in a GM truck parts catalog that is long gone. I do still have an old Corvette paper catalog that listed a 3969837, I think that may be the Qjet one. At any rate, they are both discontinued. I ran a locator for you and here are the dealers still showing to have one, good luck.

3969835
IND = INDIANAPOLIS, IN (317)
3969835
ID# Name Qty Date Phone 1 Phone 2 PA
111 HARMS AUTO SUPPLY ST 04/28/04 317-632-7447 800-382-1234 P

ATL = ATLANTA, GA (404)
3969835
ID# Name Qty Date Phone 1 Phone 2 PA
015 BILL HEARD CHEV BUFO 00* 07/16/04 770-945-4981 800-451-2823 P

INT = THE TRIAD, NC (919)
3969835
ID# Name Qty Date Phone 1 Phone 2 PA
004 FLOW CHEVROLET, INC. ST 07/19/04 919-760-7046 800-462-8458 P

YNG = YOUNGSTOWN, OH (216)
3969835
ID# Name Qty Date Phone 1 Phone 2 PA
010 GREENWOOD CHEVROLET 00 07/14/04 DIR-792-5258 800-926-4977 P

TUS = TUCSON, AZ (602)
3969835
ID# Name Qty Date Phone 1 Phone 2 PA
003 O'RIELLY CHEVROLET 00 07/17/04 520-747-8000

RIC = RICHMOND, VA (804)
3969835
ID# Name Qty Date Phone 1 Phone 2 PA
068 LARRY'S CARLAND INC 00* 07/17/04 434-292-7285 434-292-3946

Steve

Mr70 07-19-2004 10:01 PM

Re: carb heat shield....
 
They're on Ebay occasionally with starting bids between $10-20.00 NOS in GM Envelope,& end with no bidders.
You can find them.

WILMASBOYL78 07-20-2004 08:23 AM

Re: carb heat shield....
 
Thanks for the contact list I will make some calls tomorrow.

wilma https://www.yenko.net/ubbthreads/imag...lins/beers.gif


All times are GMT. The time now is 06:15 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.