Motor Wheel Spyder's ?
 

I ended up with a set of VERY nice 15" Spyder's this weekend as partial payment for a 440 6-BBL motor that I built for a customer. These sure are COOL once cleaned up !! Did any Supercars get these from their respective dealers ? Two of 'em even have a set of M&H cheater slicks !! https://www.yenko.net/ubbthreads/imag...ins/3gears.gif

Re: Motor Wheel Spyder's ?
 

WOW ! I found a set on Friday.....14x6 . https://www.yenko.net/ubbthreads/imag...mlins/grin.gif..They are in the Yenko catalog...These are super cool period correct wheels! https://www.yenko.net/ubbthreads/imag...ns/scholar.gif


Steve https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: Motor Wheel Spyder's ?
 

BKH mentioned that Don Yenko had them listed in his catalog.I do like them also. https://www.yenko.net/ubbthreads/imag...mlins/cool.gif

Re: Motor Wheel Spyder's ?
 

Yes, they are not only listed, but also pictured in the catalog... here's a pic of a local PA car that used em to race with back in the day... sorry the pic is so dark but with a flash it wouldn't show up at all... i need to buy a scanner...

Re: Motor Wheel Spyder's ?
 

It was a little bright out when I took this pic, but here are two of the four that I cleaned up - - with the M&H's. https://www.yenko.net/ubbthreads/imag...lins/beers.gif

They sure are cool lookin' .......

Re: Motor Wheel Spyder's ?
 

THOSE ARE AWESOME!

Re: Motor Wheel Spyder's ?
 

- https://www.yenko.net/ubbthreads/imag...mlins/cool.gif Wheels---------------Here's a very colorful ad back in 1969--IT SAYS-"A BOLD, BRASH NEW SPORTS WHEEL---Spyder puts you in the groove....." https://www.yenko.net/attachments/89432-SPY3.jpg

Re: Motor Wheel Spyder's ?
 

Nice score, Casey! Directly from the side they look a lot like a Chrysler rally...but as you change your angle of approach, you notice the detail. Awesome...

Re: Motor Wheel Spyder's ?
 

Lookin sweet! I found a date written in black marker inside mine,11/02/69 with a 677(?) also...Can you get me a better shot of the polished area on the center section? I need to repolish mine and don't know where the edge ends tward the steel rim....


Steve https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: Motor Wheel Spyder's ?
 

I'll get a better close up. Quite honestly, I *think* that the "spoke" area that I polished up, actually gets polished down closer toward the steel outer rim. I didn't polish that up yet, as I was doing it by hand, and I got tired of polishing ...... https://www.yenko.net/ubbthreads/imag...ins/tongue.gif I need one of those little Dremel deals with the polishing pads on for my lazy-self ...... https://www.yenko.net/ubbthreads/imag...iggthumpup.gif