Turbo 400 cross member
 

Can someone tell me which way the t400 transmission cross member goes in? The length front to back looks correct, right to left does not look good. The drives side header is within 3/4" of the sub frame while the passenger side header is about 3.5" away from the subframe. Any help or a picture would help.....thanks tom

Re: Turbo 400 cross member
 

You might want to give more info as to what car and model you are needing the info for. there were a lot of different cars that used that tranny in them? https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Re: Turbo 400 cross member
 

Sorry about that. This is 69 SS/RS Camaro, 427 B/B with air.