1968 camaro subframe
 

how to tell if a subframe is a correct 1968 frame whats the difference like brake line mounting or fuel line mounting

one way is the location of the bump stops welded on the frame at the a-arm location- different location than a 69 frame. i'll try to find u a pic

thanks would appreciate that

here u go - -

location corresponds with the correct a arms for 67-68 - - different location for 69

there is also some differences on the subframe at the front horn area - i believe CRG talks about it

what about the 67 frames do they differ from the 68 frames

i can't find the org link for the subframes - but here is some info


https://www.camaros.org/forum/index.php?topic=2634.0

What's the going price for good condition, pit free 69 Frame ???

Five years ago I helped a friend clear out his 'car stuff' when he was going through a divorce. He had literally tons of Chevrolet parts which included 2 mint '69 subframes. One was ready for installation and the other only needed a top coat of paint. Both subframes were perfect..

I rescued them before they went into a dumpster, hauled them home and racked them against a wall in my shop for safekeeping. Three years later I needed the room and hauled them to a local swap meet where one guy bought both of them. The finished one went for $450 and the other for $300...Canadian.

mint shape - i would say easy 5-700......harder to find rust free and not bent. IMO