The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Technical & Restoration (https://www.yenko.net/forum/forumdisplay.php?f=86)
-   -   1969 Jack handle with raised "0" (https://www.yenko.net/forum/showthread.php?t=184343)

daveg 01-08-2026 07:56 PM

1969 Jack handle with raised "0"
 
3 Attachment(s)
This was in another thread but this further info kinda clears it up a bit.

Just bought these 2 on epay.

Maker info is interesting.

These match hers.
Takes care of 2 more cars

Not long after that thread a couple showed up on epay for MUCH more money.
AND they sold.
Problem was the "0" was stamped in.
Do the math.

daveg 01-08-2026 08:06 PM

1 Attachment(s)
H E Orr is still around.
Note pic on top.
They still put "0"'s on lug wrenches.

daveg 01-08-2026 08:12 PM

Should add it is VERY likely GM had other suppliers of these.

What I do know is at least 1 02C built Baltimore 1969 Chevelle came with one.

Good enough for me so the hunt continues.
First chance to buy real ones.

Ralph Spears 01-08-2026 08:23 PM

1 Attachment(s)
What exactly are you looking for

daveg 01-08-2026 11:44 PM

The one just above tape has hope.
Can you post pics of its head?

I am aware there are quite a few different ones.

There is one on epay like your bottom one now for $29

Ralph Spears 01-09-2026 01:57 PM

I checked all of them they are too rusty on the end to see any letter or stamping


All times are GMT. The time now is 10:35 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.