The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Technical & Restoration (https://www.yenko.net/forum/forumdisplay.php?f=86)
-   -   Embossed AC212CW Air Filter Element Age (https://www.yenko.net/forum/showthread.php?t=183628)

SuperNovaSS 10-06-2025 06:21 PM

Embossed AC212CW Air Filter Element Age
 
7 Attachment(s)
Hey Guys,


I recently came across this old AC212CW air filter element. It has the early "Best Way to Protect Your Engine" printed lettering and "AC Spark Plug A212CW" embossed in the rubber. I thought his was the 1968 style but it has the diagonal wire mesh as shown. Can anyone tell me the years this was made/used.


Thanks,

Jason

PeteLeathersac 10-06-2025 07:02 PM



No answer for years used but if selling, Jim’s seeking one for his ‘69 9561 car as last post of this thread…
https://yenko.net/forum/showthread.php?t=181596&page=4
:beers:
~ Pete

.

SuperNovaSS 10-09-2025 01:38 AM

For those curious, I confirmed with a very reliable source that this is 1969-early 70 correct.

Jason

AnthonyS 10-09-2025 02:20 AM

Nice! Good info.

Steve Shauger 10-09-2025 05:12 PM

6 Attachment(s)
This element came out of a flat bottom cowl induction air cleaner. The flat bottom version was used from Dec of 68 to late spring/ early summer of 69.

bergy 10-09-2025 08:50 PM

Yes - that’s the one that I have on the Pace Car Steve. I thought that the soldered square mesh wires (rotated 90 degrees) lasted through the 69 model year. The latest 69 Camaro that I’ve ever owned was 05E though.

TimG 10-09-2025 09:15 PM

Steve, I have the same air filter with the same raised lettering, that will work for a 67 also. Mine has a fairly dirty element, and I wish there was someway to clean or replace it.

mhm1966 10-09-2025 10:40 PM

I have seen that filter on an original low milage 1966 Corvette.

Steve Shauger 10-09-2025 10:56 PM

Well its perfect for my survivor 67 l78 Camaro. My previous research dated as 68 and 69. Well it will be installed on that car now!

Steve Shauger 10-09-2025 10:59 PM

Quote:

Originally Posted by bergy (Post 1680840)
Yes - that’s the one that I have on the Pace Car Steve. I thought that the soldered square mesh wires (rotated 90 degrees) lasted through the 69 model year. The latest 69 Camaro that I’ve ever owned was 05E though.

In my post I was only stating when flat bottom cowl was in production not the element. The new information helps me if it was used in 67!
.


All times are GMT. The time now is 12:23 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.