3866963 1965 dated 396 / 425 intake
 

Hi Gang, I have the pictured intake here available.

The center plenum seems to have been cut, but no other issues beyond the corrosion at the stat housing, two carb stud helicoils, and one of the coil mounting holes is wallowed out oversize that I can see. What looks like a crack I think is just a casting flaw as happens. It's been cleaned and is ready to go.

Plenty of photos below for a full picture - as-is of course, as always.

Great date of 06-01-65, but of course that's on the underside.

Priced accordingly at $350 plus shipping.

Thanks all,
Anthony