The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Parts/Memorabilia - For Sale (https://www.yenko.net/forum/forumdisplay.php?f=83)
-   -   454 SHP 4 bolt main std bore (https://www.yenko.net/forum/showthread.php?t=169730)

F41427 11-18-2021 04:42 PM

454 SHP 4 bolt main std bore
 
8 Attachment(s)
1978 date 454 with the large oil boss above the filter. The block was just cleaned magged no cracks then shop peened. The caps were bead blasted. Notice The casting numbers were stamped backwards from the factory. Comes with choice of GM Dimple rods pressed or floaters.
The Machine shop said the bores will clean up at .020. That is all the work I had done. Same foundation as the LS6 blocks just different casting number and date. No vin stamp present. I do have the windage tray bolts just not pictured. This is a super clean solid block to have built and hard to get std bore still. $2,500

luzl78 11-18-2021 08:20 PM

Do the cylinders have to be machined?

WILMASBOYL78 11-18-2021 09:08 PM

454...
 
Quote:

Originally Posted by luzl78 (Post 1571613)
Do the cylinders have to be machined?

from the ad...

The Machine shop said the bores should clean up at .020.

luzl78 11-18-2021 09:16 PM

Quote:

Originally Posted by WILMASBOYL78 (Post 1571623)
from the ad...

The Machine shop said the bores should clean up at .020.

Yea yea. Idiot me reads the ad too fast. Thanks for keeping me in the know.


All times are GMT. The time now is 03:00 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.