1969 Camaro Inner Fender Dust Shields
 

LOCATED - thanks SYC and to James and Graeme for their offers. In particular thanks to my shop partner Paul M (Paulolds) and to a couple of Oldsmobiles who donated parts to make the dust shields possible!


Down to a few remaining parts for my project - need a pair of original 1969 Camaro inner fender dust shields. Please PM if you can help - thanks!

https://live.staticflickr.com/65535/...2ed9162a_o.jpg

Hey guys, would appreciate if someone has a set and can help me out. Every 69 Camaro produced got a set of splash shields and most didn't survive but there has to be some good ones out there. I just need a full or partial set for my project. Please PM if you can help - Thanks!

Lloyd - If you want some of the masticated rubber with the cords showing I have some which I can send you.
- I cut the splash shields for both my LT1's, my 68 GTO, and for Bruce's pacer from the stock I have.
His were in terrible shape except for the one on the drivers side which is stapled to the little metal shield & goes down under the brake booster.

James, thanks for the kind offer. My preference is to locate originals however if that comes up short I'll take you up on our offer. My body guy is scheduled to bolt on the front clip in a two weeks so my search is time dependent.

I have a real nice pair of originals here that I had eyes on recently. I will have a look for them later today and see if I can stumble across them again. I think I have the left and right sides and also have a couple of the shields for the column base complete with brackets that are also nice.

Hi Graeme, thanks for posting, sent you a PM.