|
1969 Camaro Hurst Shifter Assembly
8 Attachment(s)
Pulled from a purchased transmission. I do not know the history and all I did was clean it up. $700 shipped lower 48. It’s not perfect it’s 90% complete (minus the isolators, clips and reverse lever).
|
GLWS. Nice setup
|
2 Attachment(s)
There are no numbers on the rods and I wanna make sure everyone saw the weld repair on the on rod which a grinder and some time you would never know it was welded.
Went ahead and smoothed out the weld before going on eBay. |
In case you are not aware, that is not a '69 Camaro reverse lever.
- Warren |
The levers are just included. I should have made that known in the original post.
|
The reverse lever is 68 Firebird. I imagine that is what the shifter came out of. Nice piece.
Jason |
Transmission was 68 Firebird from the partial vin. Learned something today. Thanks Jason. Didn’t know 68 Firebirds had the same shifter assembly as 69 Camaro.
EDIT 6/2/21: Wanted to add that I just discovered that the shifter handle will need knew clips and isolators. Around $40 from Camaro Central. Thought I should disclose the findings as soon as I found it. New price due to this and the weld issue. $700 shipped lower 48. Also added a photo in my previous post of how the welded 1-2 rod cleaned up. |
PM sent
|
|
Less than 4 hours left on eBay.
|
| All times are GMT. The time now is 04:24 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.