67 camaro brakes
 

My 19 year old son rescued his first project car last week a 67 camaro rs. Car has been sitting for at least 25yrs so of course all the brake fluid in the master is gone with that little bit of gook sitting on the bottom. Planning on changing master, wheel cylinders(2 are frozen) spring hardware and linings. Would you guys recommend changing the hoses(not cracked) and proportiong valve. Is the prop valve something you can take of and try to clean? Its a power 4 wheel drum car. Thanks, Mark

Yes! Change the hoses. Rebuild the prop valve, not too tough and the rebuild kit is cheap and available here: https://www.musclecarresearch.com/

Thanks, I appreciate it. Mark

Hoping you are referring to the rear flex hose too.

Yes got that one also.. Thanks

Agree. Just no reason NOT to as long as you are going to be into the hydraulics anyway.

Got any pics of this jewel ?

No pics, no proof...:p

I still have some parts left over from my 67 RS/SS. Pm me your needs.
Buddy

Buddy thanks, ill keep you in mind.. I'll try and post some pictures tomorrow.. Thanks all. Mark

Not exactly a gem yet, but heres a couple. 327 rs, Ermine white/red interior.