Vintage Lakewood Trac Bars
 

Just found the earlier thread on Traction bars and posted the pictures and questions onto the tail end of that thread.

Sorry for the duplication.

Graem, That snubber you have (see photos) also will have a GM part number, they were used on frames in the center above the differential for a pinion snubber. I don’t know if they’re still available from GM. The two snubbers on the right that are slightly different shaped do not have any part numbers on them,Rob.

Thanks Rob...

No GM numbers on this one to be seen? To the right of the 535757 number is what appears to be E 0 7 or possibly F 0 7 but that's it. I'd like to find one shaped similar to this or a maybe taller one that I can cut down to match it (as long as it's close to being the same shape and has the same OD).

There is an old thread on here about these traction bars. You have a street set. The competition sets were longer.