Z28 oil pan
 

Used late production or Early OTC pan. Really nice, but not perfect. Has a few pit spots in just a few places but not too bad. Lightly blasted the outside and misted a light coat of paint so the true condition would show up in pics. Inside not touched at all. Has drain plug too.

https://s19.postimg.org/6c48qtiwz/20171111_145509.jpg
https://s19.postimg.org/tdktwkqab/20171111_145524.jpg
https://s19.postimg.org/47jvpqwpv/20171111_145402.jpg
https://s19.postimg.org/wn3ugpj6b/20171111_145544.jpg
https://s19.postimg.org/5112vzpir/20171111_145423.jpg
https://s19.postimg.org/6q5kqnfxv/20171111_145611.jpg
https://s19.postimg.org/usmeld48z/20171111_145408.jpg
https://s19.postimg.org/dfc46f177/20171114_190733.jpg
https://s19.postimg.org/ph7i0ki5f/20171114_190803.jpg
https://s19.postimg.org/621bl5937/20171111_145455.jpg
https://s19.postimg.org/kl8gmjuib/20171111_145449.jpg
https://s19.postimg.org/ph7i0ki5f/20171114_190803.jpg
https://s19.postimg.org/macygxi9v/20171114_190746.jpg
https://s19.postimg.org/d930h64mb/20171111_145414.jpg

$285 shipped Paypal F&F preferred
Scott

Do you know if this pan Would this pan be correct for a 70z?

I don't know what a 70 pan would be, This style or one with indented rail grooves.

I believe there's a difference between the one used on the 302,vs. the LT-1.
Can't recall what,but it was shown on here about a dozen years ago.

sold! Thanks SYC!