The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Technical & Restoration (https://www.yenko.net/forum/forumdisplay.php?f=86)
-   -   1969 Z28 front coil springs (https://www.yenko.net/forum/showthread.php?t=131842)

Scott69Z 04-12-2015 09:29 PM

1969 Z28 front coil springs
 
I would like to replace my front coil springs and want my car to have the correct ride height. I purchased some 6312 springs from Camaro Specialties and was told the car would sit at the stock height. After some additional research I have read that 6308 may be the correct spring. Can anyone adivise me? Any pics would be great.

Thanks

Scott

olredalert 04-13-2015 01:36 PM

Re: 1969 Z28 front coil springs
 
----Google "Eaton Springs" in Detroit and ask their advice.......Bill S

Donnie 04-13-2015 01:44 PM

Re: 1969 Z28 front coil springs
 
http://www.eatondetroitspring.com/

Zman1969 04-13-2015 03:05 PM

Re: 1969 Z28 front coil springs
 
check out what David Pozzi says about them. look down low on the thread also
Camaro springs

Billohio 04-14-2015 12:09 AM

Re: 1969 Z28 front coil springs
 
The weight of equipment determined which spring. I would have to go look but I picked up mine (moog) from summit racing after reading Pozzis site. Good info there.


All times are GMT. The time now is 08:18 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.