The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Technical & Restoration (https://www.yenko.net/forum/forumdisplay.php?f=86)
-   -   correct argent silver lacquer (https://www.yenko.net/forum/showthread.php?t=127910)

Lynn 07-03-2014 03:12 PM

correct argent silver lacquer
 
Anyone have a source for CORRECT lacquer argent silver paint (not in a rattle can).

I bought a quart from carpaintonline.com. The coverage is not good, and it is too dark.

Lynn

m22mike 07-03-2014 09:29 PM

Re: correct argent silver lacquer
 
Lynn
See if you have a PPG paint store that still mixes lacquer, I have been using acrylic enamel and it sprays and looks the same. They can mix it in OMNI too.
PPG 8568

Mike

YENKO DEUCE REGISTRY 07-03-2014 11:40 PM

Re: correct argent silver lacquer
 
I would suggest against the PPG Omni line, I wouldn't go below the ShopLine level - and would suggest at least the Deltron if not the Global line.... IMHO.

Lynn 07-04-2014 01:02 AM

Re: correct argent silver lacquer
 
NOBODY in the OKC metro mixes PPG lacquer. There is no law against it. They just don't carry it.

Of course, and this makes NO SENSE, you can buy all the lacquer thinner you want from the same guys that won't sell lacquer.

I agree with Marlin. Good stuff or not at all.

Schonyenko2 07-04-2014 04:08 AM

Re: correct argent silver lacquer
 
What are you going to paint?

firstgenaddict 09-18-2014 06:53 PM

Re: correct argent silver lacquer
 
I use Dupont Chroma Premier with a bit of hardener for durability, matched the NOS headlight bezels perfectly.


https://lh5.googleusercontent.com/-o...crop_color.jpg



https://lh5.googleusercontent.com/-o...0/100b5302.jpg

Z11Weaver 09-19-2014 01:35 AM

Re: correct argent silver lacquer
 
Gorgeous!!!! I love a lemans Blue Z with Blue Deluxe and an endura!!!!

olredalert 09-19-2014 02:24 PM

Re: correct argent silver lacquer
 
----That's how an Endura bumper should fit!.....Bill S

bergy 09-19-2014 04:13 PM

Re: correct argent silver lacquer
 
That's for sure Bill - how about a picture of the other side. If it fits just as nicely - it'll be the best I've ever seen! Usually one side or the other has a little more of an outboard gap. Of course, the re-pops are nothing but gaps!

firstgenaddict 09-19-2014 04:42 PM

Re: correct argent silver lacquer
 
Other side....
https://lh6.googleusercontent.com/-e...2B036_crop.jpg

Don't think I didn't spend my share of time getting it aligned, hell I was so frustrated at one point I wanted to go with bigger hammer ie 5lb sledge and use the "BEAT TO FIT AND PAINT TO MATCH installation technique!"


https://lh4.googleusercontent.com/-h...rCorrected.jpg


All times are GMT. The time now is 11:37 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.