Big Block Engine Lift Brackets w/bolts (2.5 sets)
 

2-1/2 sets of original big block engine lift brackets and bolts
1. Sharp top corners on front bracket, Omega/horse shoe stamp, Rear bracket L stamp long style SBC bolts 150.00
2. PERFECT SURVIVOR TAKE OFF CONDITION!! Sharp top corners on front bracket, Omega/horse shoe stamp, Rear bracket short style. RSC bolts for front bracket, SB for rear. 200.00
3. Rounded top corner front bracket, CH bolts. SOLD, Thanks SYC!!!

Re: Big Block Engine Lift Brackets w/bolts (2.5 sets)
 

PM sent.

Re: Big Block Engine Lift Brackets w/bolts (2.5 sets)
 

I wanted to add some info to this so if anyone is interested in these can make the right choice depending on year and model.
First-NO LIFT BRACKETS were used prior to 68, 68 was the first year for them.
Second 70-up Camaros, Chevelles and Novas used the rounded top style. Here is where I'm not 100% positive and that is if ALL 70-up front brackets had a PT# and small hole for the fuel filter hook. SO check out the link to see.
I have seen 70-74 Corvettes with the Sharp top corner bracket.
Hope this helps, Thanks, Rich
https://www.yenko.net/ubbthreads/ubbt...252&page=1

Re: Big Block Engine Lift Brackets w/bolts (2.5 sets)
 

More lift brackets.
Rear brackets
1 L
1 M in a circle
1 MW
100.00 each.

Re: Big Block Engine Lift Brackets w/bolts (2.5 sets)
 

1 68 69 396 427 front lift bracket Stamped w pt # 3994055 and V stamped. VERY RARE!! 200.00

Re: Big Block Engine Lift Brackets w/bolts (2.5 sets)
 

Found 1 more SURVIVOR rear lift bracket V stamped. VERY NICE.

100.00

Re: Big Block Engine Lift Brackets w/bolts (2.5 sets)
 

ORIGINAL TAKE OFF CONDITION UNRESTORED GREASY GRIMY REALLY NICE PAIR OFF FRONT AND REAR ENGINE LIFT BRACKETS AND MOUNTING BOLTS . Front bracket :3994055 and V stamped rear bracket M inside a C stamped , front bracket bolts WB rear bracket bolt RSC
300.00