![]() |
1969 Chevelle build sheet location
Hi all,
I am looking for a build sheet in an early July build Kansas Chevelle. I pulled the plastic backs off the seats and no luck so far. Are these sometimes hidden between the cover and foam? Wondering if it is worth my while to remove the seat covers. Thanks! |
Re: 1969 Chevelle build sheet location
Chances are slim that you will find anything.....but since you`ve gone that far....might as well look. I personally have never found one between the cover and foam.
Dan |
Re: 1969 Chevelle build sheet location
Never found one in my late July '69 from Kansas.
|
Re: 1969 Chevelle build sheet location
Most of the Kansas built 69's that I have heard of (including mine) have the sheets glued to the inside of the front fenders.
|
Re: 1969 Chevelle build sheet location
I've had two Kansas City 69 Chevelles, neither had a build sheet.
Phil Woj |
Re: 1969 Chevelle build sheet location
Have you checked behind the backseat bunting & in between those seat springs?
How bout under the rear deck cardboard? Behind the 2 door panels,ft. side floor vent panels,& rear seat side window panels? The headliner,the kick plate behind the brake pedal,under carpet and on top of or under floor sound deadner? Don't rule out the dashboard.Both inside the pad & on top of the radio too. |
Re: 1969 Chevelle build sheet location
I would try looking above the gas tank if it hasn't ever been disturbed. Possible it might be there.
SAL |
Re: 1969 Chevelle build sheet location
Thanks folks. Nothing ventured nothing gained, I suppose.... The car is pretty much in pieces so most of the suggested areas are N/A.
|
Re: 1969 Chevelle build sheet location
call Dennis 1-810-923-9003 I have some info
|
Re: 1969 Chevelle build sheet location
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Bill Pritchard</div><div class="ubbcode-body">Most of the Kansas built 69's that I have heard of (including mine) have the sheets glued to the inside of the front fenders. </div></div>Every Kansas chevelle I've had had them there.
|
All times are GMT. The time now is 09:27 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.