Exhaust Manifold Washers - SB
 

Is there any opinion on this ebay ad related to the fact that only the outside ports get the washers?

Particularly i'm thinking about 69Z/28's

ebay exh washers

Re: Exhaust Manifold Washers - SB
 

Hey Eddie, try this Click Here

Re: Exhaust Manifold Washers - SB
 

thanks - not sure what I did wrong???

Re: Exhaust Manifold Washers - SB
 

It's been my understanding that only the bolts that got the french locks got the washers.

Verne [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

Re: Exhaust Manifold Washers - SB
 

really?? so the sequence is the bolt, French lock then the washer before u install the exh manifold???

Re: Exhaust Manifold Washers - SB
 

Nope. The washer is against the manifold, then the french lock is under the bolt head.
Maybe we're saying the same thing............??

Verne [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

Re: Exhaust Manifold Washers - SB
 

My nova has the lock washer in front of the french lock against the exhaust manifold. So its the bolt, lock washer, french lock and onto the manifold. I guess if it was the other way around the french lock would not allow a good seat on the manifold maybe.

Re: Exhaust Manifold Washers - SB
 

Sam,
It's not a lock washer; it's a thick flat washer. The french lock needs to be under the bolt head, against the flats, so it can do its job by preventing the bolt to turn.

Verne [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

Re: Exhaust Manifold Washers - SB
 

I am with you Verne. I guess whoever did my car did it there way. Probably will see this done on survivor cars both ways. The tabs need to be bent over the heads of the bolts like you said.

Re: Exhaust Manifold Washers - SB
 

Are they &quot;Circle Head Exhaust Manifold Bolts&quot;.