68 396 (L78) clutch/fan
 

Looking for a clutch/fan setup for a 68 396 (L78). The unit has a 3 1/4" bolt center not 3". There are also 4 rivets on the fan blade not 5. The clutch is by Schweitzer.

Re: 68 396 (L78) clutch/fan
 

Tough part to come by...good luck.

wilma

Re: 68 396 (L78) clutch/fan
 

Very tough indeed. Took me well over a year to find one for the Yenko. Be VERY cautious of the fakes as they are making them using a different fan and enlarging the flange hole and use a similar looking clutch. They look accurate and will work but are not original L78 so you don't want to pay original L78 prices for them which is a LOT.

Re: 68 396 (L78) clutch/fan
 

I got a really nice one from ebay back in Oct. It was a buy it now for 595.00

Re: 68 396 (L78) clutch/fan
 

You still looking? PM me... ;)

Re: 68 396 (L78) clutch/fan
 

Would you happen to have a 69 CZ L78 fan clutch ?
I can send you photos and measurements If you need it
Thank you
Fred
[email protected]

Re: 68 396 (L78) clutch/fan
 

I'm also looking for a 69 CZ L78 fan clutch for a 06A build date '69 L78 Nova if anyone else has one as well...

Thanks

Re: 68 396 (L78) clutch/fan
 

1969 L78 NOVA never used a fan clutch. The fan is fixed. Sure makes a lot of dust in the engine compartment compared to a clutched one. Has anyone else noticed this. My l78 is a 70 ,but the fan is the same. John

Re: 68 396 (L78) clutch/fan
 

John...don't know about the dust...but those 5 blade steel fans sure make some noise when they get up over 3,000 rpm's....that's one of the reasons they were ditched way back when.

*69 and 70 L34/L78 both used the same 5 blade fan blade.

wilma