![]() |
1967 #391 Heads with Hairline Crack
I have found a set of matching 3904391 heads with one head having a hairline crack where the gasket goes for the exhaust manifold. It is about 3/4 of an inch long. Does anybody think this would be a concern running on an engine because the machine shop that checked these heads out said it was fine? Just wanted some opinions on this.
|
Re: 1967 #391 Heads with Hairline Crack
Should be fine ive had those before. drill a small hole at the end of the crack to prevent it from spreading
|
Re: 1967 #391 Heads with Hairline Crack
How much do you think it would affect the value of the set?
|
Re: 1967 #391 Heads with Hairline Crack
10-20% if you are selling them bare. Sell them rebuilt with a shop receipt and the crack wont affect price as much
|
All times are GMT. The time now is 04:55 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.