Help with vintage wheel ID please
 

I picked up this set of wheels last year because I wanted the vintage polyglas tires that were mounted on them. I was hoping to get some help IDing them. There are no brand markings on the backside, but as you can see they have two different types of caps - Mr. Gasket and Dynasty. The wheels are the two-piece variety with steel outer rim. They are all 15-inch, but I believe there are two different widths (8" and 6"). They have a very deep offset, and I believe they were originally on a Corvette. Any help is appreciated!

http://shapeconsulting.com/cars/wheels1.JPG
http://shapeconsulting.com/cars/wheels2.JPG
http://shapeconsulting.com/cars/wheels3.JPG
http://shapeconsulting.com/cars/wheels4.JPG
http://shapeconsulting.com/cars/wheels5.JPG
http://shapeconsulting.com/cars/wheels6.JPG

Re: Help with vintage wheel ID please
 

Hi Rainer,

Good to see you on here, hope all is well.

You may consider asking the same question on here: http://www.corvetteforum.com/

Dan

Re: Help with vintage wheel ID please
 

Never heard of a Dynasty wheel, but Mr Gasket had a Cragar look-a-like. I would suspect that's what these are.

Re: Help with vintage wheel ID please
 

I have Cal Customs on my 69 Camaro which have the similar flat spokes which these have.

Re: Help with vintage wheel ID please
 

They sure look like the Dynasty wheels my buddy had on his Duster back in the day. I would say Dynasty

Re: Help with vintage wheel ID please
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Thomas</div><div class="ubbcode-body">I have Cal Customs on my 69 Camaro which have the similar flat spokes which these have. </div></div>

Thomas, we gotta' see a picture!

Re: Help with vintage wheel ID please
 

How do I post a pic?
Do you want to see the car or the rim?