The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Technical & Restoration (https://www.yenko.net/forum/forumdisplay.php?f=86)
-   -   1969 Chevelle Horns and Wiring (https://www.yenko.net/forum/showthread.php?t=116835)

Zach Carter 02-06-2012 03:12 PM

1969 Chevelle Horns and Wiring
 
Does anyone have any pictures of how the dual hornes are supposed to me mounted on the hood latch? I also need to see how the wiring from the horn relay to the horns is supposed to be routed. Any help is appreciated. I should have taken better pictures...

Don_Lightfoot 02-07-2012 12:51 AM

Re: 1969 Chevelle Horns and Wiring
 
Here's a couple of images Zach. Hopefully they will help.

http://www.pbase.com/don_lightfoot/image/141343614.jpg

http://www.pbase.com/don_lightfoot/image/141343615.jpg

Postsedan 02-13-2012 11:26 PM

Re: 1969 Chevelle Horns and Wiring
 
Don`t forget the horn wire clip(s).... not pictured in Don`s photo.

Dan

Zach Carter 02-14-2012 12:30 AM

Re: 1969 Chevelle Horns and Wiring
 
Thanks for the picture. It did help. I'm also trying to see how the harness comes off the horn relay and routes to the horns.

Postsedan 02-14-2012 01:02 AM

Re: 1969 Chevelle Horns and Wiring
 
Zach,

Simply run wire through the hole (with the factory grommet) attach to harness... run the wires up under the header panel, use the clips (shown in picture)

Shows complete illustration in assembly manual.

http://img.photobucket.com/albums/v6...2/P1010684.jpg

Dan


All times are GMT. The time now is 07:01 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.