Ansen 14x7 Torque Thrust rims
 

I've got a set of 4 14x7 Ansen Torque Thrust rims with a 3" back spacing. Has anyone on here had any experience with a similar set up. I'm just curious if they will rub or not. I'm planning on running a Goodyear F70-14 tire on them. I'm planning on mainly running them on my 1969 SS/RS 396 coupe with all stock suspension. I currently have the tires on an older set of 14x7 American Racing Torque Thrust rims with a 3 1/4" back spacing. I've had them on my 1969 Camaro convertible that has stock suspension as well and not had any issues, but I'm wondering if that 1/4" might make a big difference. I did have the American Racing set on my 396 car a few years ago, but if I remember correctly I thought it looked like it might possible rub the back of the fender. Which also makes me curious if the subframe was properly installed when it was restored since I had no issues with them on my convertible. The Ansens look really cool and would give me car a great day 2 look. Any input is much apprecaited.

Thanks, Jesse