Original 454 LS6 Engine Complete Intake to Pan
 

This is a complete LS6 454/450 engine from carb to pan minus the cam and lifters. It was removed from a 1971 jet boat so the date codes are all late 70-early 71. This would make a great replacement engine for an LS6 Chevelle or other hi perf warranty engine.

The numbers on the engine are as follows:

Block casting number: 3963512 Factory 4 Bolt Main

Head Casting: 3964291 Factory Rectangular Port Hi Performance

Crank Forging Number: 7416 Factory Steel Crank, Nitrited and Cross Drilled

Piston: L2349 .030, TRW Forged Piston, 1970 LS6 Replacement

Rods: Hi Performance Chevrolet "Dimple" rods with factory 7/16" rod bolts

Intake: 3963569, Factory High Performance Aluminum Intake


This is an original LS6, not a cobbled together bunch of parts. The engine is complete from intake to pan minus the cam and lifters.

The block has been bored .030 over and has almost no use since then. The tops of the cylinders have ZERO ridge. There are no breaks, sleeves, or other repairs/damage.

The heads look great with no porting or modifications. The valves sit very high in all the seats. Even the original high lift "L" rockers are still intact.



$2750

Jason

Re: Original 454 LS6 Engine Complete Intake to Pan
 

http://i179.photobucket.com/albums/w...s/71LS6012.jpg

http://i179.photobucket.com/albums/w...vass/71LS6.jpg

http://i179.photobucket.com/albums/w...s/71LS6015.jpg

http://i179.photobucket.com/albums/w...s/71LS6002.jpg


http://i179.photobucket.com/albums/w...s/71LS6016.jpg

Re: Original 454 LS6 Engine Complete Intake to Pan
 

http://i179.photobucket.com/albums/w...s/71LS6001.jpg

http://i179.photobucket.com/albums/w...s/71LS6003.jpg

http://i179.photobucket.com/albums/w...s/71LS6004.jpg

http://i179.photobucket.com/albums/w...s/71LS6006.jpg

http://i179.photobucket.com/albums/w...s/71LS6007.jpg

Re: Original 454 LS6 Engine Complete Intake to Pan
 

I have NOS cam, lifters, and valve springs if you are interested.

Re: Original 454 LS6 Engine Complete Intake to Pan
 

Damn fair price! Wish I had the extra cash and it was burning a hole in my pocket!

Re: Original 454 LS6 Engine Complete Intake to Pan
 

Sent you a PM

Re: Original 454 LS6 Engine Complete Intake to Pan
 

Sold pending payment.


Jason

Re: Original 454 LS6 Engine Complete Intake to Pan
 

That is a smoking good deal !!
I sold an LS5 from Carb to pan for $4000 a few weeks ago and this motor is a much better LS6.

Re: Original 454 LS6 Engine Complete Intake to Pan
 

Ooops, I guess this one sold too cheap. At least it is going to a member.


Jason

Re: Original 454 LS6 Engine Complete Intake to Pan
 

I bought this motor from Jason, the motor was used in a marine application. Got it home yesterday and it was as advertised. The plugs in the heads on the front end of the engine, are different than stock.

You can just make them out in the pic of the eng on the engine stand. I believe they are called "cold plugs" and I need to replace them with stock plugs. Can anyone point me to someplace where I can get replacement correct plugs. Every search I do refers to spark plugs.