Day 2 Vega
 

"Four speed" ask me to post some pictures of my Vega project. Even though I'm doing some repop Motion parts, I'll call it a Day 2 build.

Re: Day 2 Vega
 

Engine is a BBC with GM production aluminum heads. Trans is a T-101 with a mag. case, Hone-O-Drive and 12 bolt.

Re: Day 2 Vega
 

I made a copy of my original Hooker mount.

Re: Day 2 Vega
 

Nice. Is that Vega all metal?!! Never saw one that clean, not even in the 70's... [img]<<GRAEMLIN_URL>>/Can-I-Have-It.gif[/img]

Re: Day 2 Vega
 

nice work! what shift boot do you plan on using?

Re: Day 2 Vega
 

Thank you. Yes, it's all metal. I had the car shipped to me from San Jose. There was a couple of small areas around the windshield and an area under the right side glass.
I figured out a long time ago that it's better to pay out the nose for grandmas car than it is to fix rust.

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: x Baldwin Motion</div><div class="ubbcode-body">Nice. Is that Vega all metal?!! Never saw one that clean, not even in the 70's... [img]<<GRAEMLIN_URL>>/Can-I-Have-It.gif[/img] </div></div>

Re: Day 2 Vega
 

Thank you.
I have two nos Ram Rod boots. One will get trimmed down a little. I'll post a picture of another Vega that has the same boot modification.

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: four speed</div><div class="ubbcode-body">nice work! what shift boot do you plan on using? </div></div>

Re: Day 2 Vega
 

Very cool Vega [img]<<GRAEMLIN_URL>>/beers.gif[/img]

Re: Day 2 Vega
 

wow nice work!

Re: Day 2 Vega
 

nIce looking project Chandler. Did you have to modify the tunnel to accomodate the Hone-O-Drive?