![]() |
Calling all Electrical Geeks!
I need test prodedures for a 36 mfd condenser on my Mallory distributor [img]<<GRAEMLIN_URL>>/hmmm.gif[/img]. My multimeter is digital btw.
Thanks! [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img] |
Re: Calling all Electrical Geeks!
You needs a Capacitor Tester Sam. See if there is a electronics shop around, even a TV repair guy might be able to help.
|
Re: Calling all Electrical Geeks!
Figured you'd be in the know there shipmate. Any concerns about them frying it or should I be a trusting sole?
|
Re: Calling all Electrical Geeks!
No Sam, it's not a big deal... [img]<<GRAEMLIN_URL>>/rolleyes.gif[/img]
|
Re: Calling all Electrical Geeks!
Or find someone with a Sun distributor tester. They have a condenser test section.
|
Re: Calling all Electrical Geeks!
eww, that's good to know! Thanks Steve. [img]<<GRAEMLIN_URL>>/beers.gif[/img] Been doing a lot of reading on doing true, no-sh*t testing on condensers with results that are meaningful. There is ALOT of mis-information out there [img]<<GRAEMLIN_URL>>/no.gif[/img] . That little condenser is VERY important.
|
Re: Calling all Electrical Geeks!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mockingbird812</div><div class="ubbcode-body">eww, that's good to know! Thanks Steve. [img]<<GRAEMLIN_URL>>/beers.gif[/img] Been doing a lot of reading on doing true, no-sh*t testing on condensers with results that are meaningful. There is ALOT of mis-information out there [img]<<GRAEMLIN_URL>>/no.gif[/img] . That little condenser is VERY important. </div></div>
Sam, I just found out how important the condenser is on my 69 Malibu, 350/300 hp. It lost the connection between the wire and spade at the points. Car still ran, but barely. I put the pertronix ignition in that distributor and I can say the car has never run better. Good luck with your endeavor. Phil Woj |
Re: Calling all Electrical Geeks!
Thanks Woj!!
|
Re: Calling all Electrical Geeks!
Sam, A friend of mine in Mesa has the machine you ned to test it
Call me for directions. Shaun. |
Re: Calling all Electrical Geeks!
You da man Shaun - thanks!! [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]
|
All times are GMT. The time now is 12:28 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.