![]() |
Photo of a real 69 rad cap?
I know there's pics somewhere here, of an original 69 Chevy rad cap, but I can't find a pic. Anyone have a close up pic of an RC-15, or know where it might be on syc?
|
Re: Photo of a real 69 rad cap?
You have an e-mail Bill..with a photo.
Wayne |
Re: Photo of a real 69 rad cap?
Thanks Wayne... I think I have one coming. Does anyone restore them, or am I on my own?
|
Re: Photo of a real 69 rad cap?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Bill Rose</div><div class="ubbcode-body">Does anyone restore them, or am I on my own? </div></div>
Try Pete Lindahl at [email protected] or (505) 663-0995. He is a good fellow with an extensive knowledge of caps. |
Re: Photo of a real 69 rad cap?
|
Re: Photo of a real 69 rad cap?
Most likely this flat rivit one,but not unheard of to be the divit rivit in the second pic too,if assembled early.
http://i159.photobucket.com/albums/t...adcaps0006.jpg http://i159.photobucket.com/albums/t...adcaps0007.jpg |
Re: Photo of a real 69 rad cap?
I like the first picture Rick. Bill, you can do it yourself. many times they really don't need anything just cleaned up and some WD-40 soaking to help the gasket out a little. Sam Griffith (Mockingbird) I believe has the cap resto. down pat.
|
Re: Photo of a real 69 rad cap?
Thanks for all the pictures gentlemen. My only concern with an old cap, is that it works/holds pressure, unless it's just used for shows. Thanks again.
|
Re: Photo of a real 69 rad cap?
I believe Sam Griffith's specialty is gas cap resto's.
|
Re: Photo of a real 69 rad cap?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Bill Rose</div><div class="ubbcode-body">My only concern with an old cap, is that it works/holds pressure, unless it's just used for shows.</div></div>
Personally, I've had a bunch of original caps restored and when they are done, I use them just for show. Otherwise, I put a new cap on and drive on, Garth. That's not to say a restored cap won't work just fine but, after the investment, I feel better letting it be a trailer queen while a new cap does the work. Regards, Mark |
All times are GMT. The time now is 01:16 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.