The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Technical & Restoration (https://www.yenko.net/forum/forumdisplay.php?f=86)
-   -   15X7 tourqe thrusts (https://www.yenko.net/forum/showthread.php?t=108739)

69RSZ 02-13-2010 02:04 AM

15X7 tourqe thrusts
 
would 15X7 TQs work on my 67Z? Or should I go with 15X6 TQs?The standard rim size for the 67Z is 15X6 rallys.Any opinions? I am worried about fender clearance in the front when turning.

camarojoe 02-13-2010 04:26 AM

Re: 15X7 tourqe thrusts
 
It'll depend on the offset as far as clearance goes, but as far as appearance goes, 15x6's looks a ton better than 15x7s on a 1st gen camaro in my opinion.

1967Z28 02-13-2010 08:44 AM

Re: 15X7 tourqe thrusts
 
I have run both sizes at different times. I did not have a rubbing problem when I used the 15x6s but did with the 15x7s. I was running a P215/60R15 tire and stock height suspension.

-Jon

69RSZ 02-13-2010 03:40 PM

Re: 15X7 tourqe thrusts
 
Thanks,Jon I want to put them on the white Z,and use the rallys off of the white Z for the red Z untill I find a set of rallys for the red car.I was thinking of useing 15X7s so i can use em on the 69Z also.Thanks for your opinions.

tom406 02-13-2010 08:52 PM

Re: 15X7 tourqe thrusts
 
Here's a couple of options to get you cast 15x7's with a bit more backspacing:

Halibrand can machine these to 4.25" BS, 1/2" more than TT D's
http://cgi.ebay.com/ebaymotors/15x7-Hali...s#ht_1165wt_912

Vintage Wheel Works V45s have 3-7/8"BS, so another 1/8". Maybe not enough.
http://www.vintagewheelworks.com/pro...heels/v45/15x7

Team # has their 5 window 15x7 available with 4.75"BS, which would essentially put the entire extra inch inboard compared to a Torq Thrust D 15x6 (w/its 3.625"BS), but not sure if there will be clearance problems with tie rod ends, sway bar, etc.
http://www.team3wheels.com/et/classic5.html#

Finally, American's new versions of the T70R Torq Thrust have 1/4" more (4") backspacing in the 15x7 version compared to the Torq Thrust D or TTO
http://www.newstalgiawheel.com/wheel...ubcat3=1011128

'69s need all the extra backspacing they can get, too, even with their bigger wheelwells.

Good luck!

69RSZ 02-21-2010 07:44 PM

Re: 15X7 tourqe thrusts
 
Jon,will the 3 3/4 backspaceing work? I was told that the american raceing Ds are only available with 3 3/4 backspaceing not 3 1/2. anyone know if 3 3/4 will work on a 67 camaro?


All times are GMT. The time now is 09:07 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.