The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Supercar/Musclecar Discussion (https://www.yenko.net/forum/forumdisplay.php?f=79)
-   -   Jack Douglass 435hp Corvette (https://www.yenko.net/forum/showthread.php?t=106608)

Stefano 09-12-2009 01:03 AM

Jack Douglass 435hp Corvette
 
Jack sold a bunch of Hi-Performance Corvettes. Here is a 435hp Tri-Power with 4.11s and a close ratio M21 Trans, running back in the '70s

[image]http://i9.photobucket.com/albums/a79...ATTHETRACK.jpg[/image]

flyingn 09-12-2009 04:44 AM

Re: Jack Douglass 435hp Corvette
 
what did it run??

ChrisS 10-04-2009 07:31 PM

Re: Jack Douglass 435hp Corvette
 
Timeslips that the owner had at the Mecum auction showed best times in the low 14s at U.S. 30/Gary IN. He admitted to having no prior experience racing. The usual culprit was no traction with the skinny 775s.

SBR 10-04-2009 08:53 PM

Re: Jack Douglass 435hp Corvette
 
I tried to buy the car but his reserve was too high.

ChrisS 10-04-2009 09:27 PM

Re: Jack Douglass 435hp Corvette
 
Steve, what was the last bid?

SBR 10-05-2009 01:30 AM

Re: Jack Douglass 435hp Corvette
 
Chris,
I believe that the last bid was 80/85K. I stopped bidding at 65K.

Rick Cell 10-05-2009 03:24 AM

Re: Jack Douglass 435hp Corvette
 
Whats with the interior code on the trim tag?

SBR 10-05-2009 03:37 AM

Re: Jack Douglass 435hp Corvette
 
The interior code was 414 but the tag read 14 as the first 4 was missing. I believe that it was a real tag inspite of this error.

Rick Cell 10-05-2009 03:54 AM

Re: Jack Douglass 435hp Corvette
 
Steve what was the rest of the car like?

SBR 10-05-2009 04:06 AM

Re: Jack Douglass 435hp Corvette
 
Rick, the car needed a complete resto and was missing lots of parts like the tripower, hardtop, OEM tires, exhaust etc.. The seats were ripped, it had a 65 front surround installed. The good things about the car were original drivetrain, real paper, and trim tag which is more than I can say for most 67 435s. If I could do the resto myself I would have bid higher but since I cannot I would be looking at upwards of 100K to have it done.


All times are GMT. The time now is 02:36 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.