LS6 Fuel Line? Who makes the best...
 

Are all the repop LS6 fuel lines the same? Wondering if there is one that has the proper bends at the rear of the carb to clear the the PCV hose..

Re: LS6 Fuel Line? Who makes the best...
 

I've had good luck with the stuff from "Fine Lines"...

Re: LS6 Fuel Line? Who makes the best...
 

Thanks Rob.. BTW, I sent you an email.. https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: LS6 Fuel Line? Who makes the best...
 

Stick with the mild steel lines, stay away from the stainless, it's a bear to get them to seal up.

Eric

Re: LS6 Fuel Line? Who makes the best...
 

I have learned that lesson.. Anyone who has a photo of a repop setup that can post. Perhaps a PM to 70 Chevelle master Rick Nelson is in order.

Re: LS6 Fuel Line? Who makes the best...
 

[ QUOTE ]
I have learned that lesson.. Anyone who has a photo of a repop setup that can post. Perhaps a PM to 70 Chevelle master Rick Nelson is in order.

[/ QUOTE ]

That should work!

Re: LS6 Fuel Line? Who makes the best...
 

Turns out that I may be able to bend the one I have in the right shape rather than buy a new one.. Thanks Rick! https://www.yenko.net/ubbthreads/imag...ns/worship.gif

Re: LS6 Fuel Line? Who makes the best...
 

http://www.inlinetube.com/

Jim

Re: LS6 Fuel Line? Who makes the best...
 

Seems like I had to get mine from D&R.The first set that I got was from Ground Up. It was not even close to being right around the pcv valve.