Muncie ID
 

I picked up a couple of muncies and I would like to determine as close as possible what the original application was. I posted this over on the Chevelle site, but thought I'd try here as well.

The first is:

3925660 Main Case
3857584 Tail Shaft
P9S23A Code
VIN# 19Z322076
Two rings on input shaft
10 Spline Input
27 Slpine Output
Tag on side 3870358

The Second is:

3885010 Main Case
3857584 Tail Shaft
P0713 Code
VIN# 6S126722
Two rings on input shaft
10 Spline Input
27 Slpine Output
Tag on side 3870354

TIA,

Jon

Re: Muncie ID
 

Jon, try this website....

http://www.muncietrans.com/munice4.shtml


Rich https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: Muncie ID
 

The first trans will fit on a 68 /69 passenger car, Vette, Nova, Camaro Chevelle. Should be a M20 Wide Ratio.

The second fits the same but a 66 / 67.

Re: Muncie ID
 

Both are M20's - the first one is out of a '69 Chevelle built at Fremont, California, and the second one is out of a '66 Corvette (St. Louis).

https://www.yenko.net/ubbthreads/imag...lins/beers.gif