|
Ring Gear ID???????
Just cracked open the rear of a 12 bolt in a 69 Chevelle, open rear end, and the large ring gear has the number 46 ink stamped on it.. Also looks like there might be a "B" with a circle around it in front of this 46. The rear end code on the axle tube says the rear is a 3:31..
Anyone have any idea what this ink stamp on the large ring gear deliniates??? I don't think the rear end was ever messed with, appears to be all original untouched.. I couldn't find any other numbers stamped on the large ring gear.. Thanks....... Rich |
Re: Ring Gear ID???????
1 Attachment(s)
Inspection mark.
The gear part numbers are probably stamped on the flat surface on the back of the gear instead of the OD of the ring. |
Re: Ring Gear ID???????
1 Attachment(s)
partial stamp
These pics are from Alan's COPO gearset. |
Re: Ring Gear ID???????
my 4.10 (4-69) (non-copo) gear set has the date code stamped on the end of the gear not on the flat,...were the service parts done differently?
|
| All times are GMT. The time now is 09:13 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.