1969 COPO 427 MN Block
 

It is not mine but thought maybe someone might know where the car is. Vin is 19N641573


I noticed that this block was cast 2 weeks before mine, assembled 1 month after mine and my vin is 19N650xxx. https://www.yenko.net/ubbthreads/imag...lins/dunno.gif
Kurt

http://cgi.ebay.com/ebaymotors/1969-COPO...sspagenameZWDVW

Re: 1969 COPO 427 MN Block
 

I can attest from experience on selling 2 MN motors there is no cheaper individual than a COPO owner with the wrong motor in his car. The cloners pay more... https://www.yenko.net/ubbthreads/images/graemlins/no.gif

Re: 1969 COPO 427 MN Block
 

Which is unbelievable isn't Chuck?

Re: 1969 COPO 427 MN Block
 

[ QUOTE ]
I can attest from experience on selling 2 MN motors there is no cheaper individual than a COPO owner with the wrong motor in his car. The cloners pay more... https://www.yenko.net/ubbthreads/images/graemlins/no.gif

[/ QUOTE ]

That doesn't make any sense to me. If I owned muscle car, especially a COPO, and someone had the original motor to it, I would give my right arm for it.....maybe not 'cause than I couldn't shift. https://www.yenko.net/ubbthreads/imag...ins/3gears.gif https://www.yenko.net/ubbthreads/imag...mlins/grin.gif

Re: 1969 COPO 427 MN Block
 

Yeah I think anyone who has one of these cars would love to have the original engine however, sometimes the guy who has the engine wants to hold you ransom as with my car.

Re: 1969 COPO 427 MN Block
 

Its simple would you spend .10 cents to make 10.00 dollars
its a NO BRAINER?? https://www.yenko.net/ubbthreads/imag...lins/dunno.gif
PJ

Re: 1969 COPO 427 MN Block
 

[ QUOTE ]
Yeah I think anyone who has one of these cars would love to have the original engine however, sometimes the guy who has the engine wants to hold you ransom as with my car.

[/ QUOTE ]

Yes, but let's put this in perspective. I am just throwing numbers out there for simplicity. If a COPO car is worth...$100,000 restored without the original motor. And it is worth $150,000 with the original motor, what do you think that motor is worth to the seller? We know what it is worth to the buyer.

Re: 1969 COPO 427 MN Block
 

I had 4 original MN motors...One sold and is in a ls6 70 chevelle, one went to a guy whos making a 68 clone 427 car, one is still for sale, and the last one im going to put in a 68 small block camaro. I did find the owner of the car for one of the motors, he said to contact him and let him know who i end up selling the motor to so he can keep track of it. https://www.yenko.net/ubbthreads/imag...lins/dunno.gifhttps://www.yenko.net/ubbthreads/imag...s/confused.gif https://www.yenko.net/ubbthreads/imag...s/confused.gif https://www.yenko.net/ubbthreads/imag...s/confused.gif

Re: 1969 COPO 427 MN Block
 

[ QUOTE ]
I did find the owner of the car for one of the motors, he said to contact him and let him know who i end up selling the motor to so he can keep track of it. https://www.yenko.net/ubbthreads/imag...lins/dunno.gifhttps://www.yenko.net/ubbthreads/imag...s/confused.gif https://www.yenko.net/ubbthreads/imag...s/confused.gif https://www.yenko.net/ubbthreads/imag...s/confused.gif

[/ QUOTE ]

Now that is funny. https://www.yenko.net/ubbthreads/imag...mlins/haha.gif

Re: 1969 COPO 427 MN Block
 

[ QUOTE ]
[ QUOTE ]
I did find the owner of the car for one of the motors, he said to contact him and let him know who i end up selling the motor to so he can keep track of it. https://www.yenko.net/ubbthreads/imag...lins/dunno.gifhttps://www.yenko.net/ubbthreads/imag...s/confused.gif https://www.yenko.net/ubbthreads/imag...s/confused.gif https://www.yenko.net/ubbthreads/imag...s/confused.gif

[/ QUOTE ]

Now that is funny. https://www.yenko.net/ubbthreads/imag...mlins/haha.gif

[/ QUOTE ]

Who knows, could be the economy....

Re: 1969 COPO 427 MN Block
 

Yes you could be right. I think that it is smart to keep track of where it is. But I just thought it was funny when I read it the first time. I also think that if someone owns a COPO car they could afford the motor. But I have been wrong before. Could be a timing thing where the funds are just not there at the present time. Although now is the time to buy since the market has seemed to slow down.

Re: 1969 COPO 427 MN Block
 

[ QUOTE ]
Who knows, could be the economy....


[/ QUOTE ] This happened last year when COPO asking prices were 300K and up, plus 12K for THE rebuilt original 427 motor to your car is a great price even if its for a 75K car..........enter the cloners.....

Re: 1969 COPO 427 MN Block
 

[ QUOTE ]
[ QUOTE ]
Who knows, could be the economy....


[/ QUOTE ] This happened last year when COPO asking prices were 300K and up, plus 12K for THE rebuilt original 427 motor to your car is a great price even if its for a 75K car..........enter the cloners.....

[/ QUOTE ]

If the guy who still has my engine was asking 12k I would of bought it up in a heartbeat, but 28000 was alittle overboard. Funny thing, next swapmeet I saw him selling at with my engine in his spot, a ce engine showed up 2 spots from him for 800.00 with the same casting dates. Guess what's in my car.

Re: 1969 COPO 427 MN Block
 

[ QUOTE ]
I had 4 original MN motors...One sold and is in a ls6 70 chevelle, one went to a guy whos making a 68 clone 427 car, one is still for sale, and the last one im going to put in a 68 small block camaro. I did find the owner of the car for one of the motors, he said to contact him and let him know who i end up selling the motor to so he can keep track of it. https://www.yenko.net/ubbthreads/imag...lins/dunno.gifhttps://www.yenko.net/ubbthreads/imag...s/confused.gif https://www.yenko.net/ubbthreads/imag...s/confused.gif https://www.yenko.net/ubbthreads/imag...s/confused.gif

[/ QUOTE ]

Why is it those same cheap guys (that won't step-up and buy the right components their cars deserve) will hold onto those cars and let them rot until their dying days?

Did you happen to come across a 427 motor with the VIN 9N661654 on it? Hopefully it wasn't one of the motors you've sold https://www.yenko.net/ubbthreads/images/graemlins/no.gif

Re: 1969 COPO 427 MN Block
 

Why call these guys cheap? Perhaps they have have other things that they need to spend their hard earned cash on, like paying a mortgage, heating the house, taking care of a patent, or maybe even feeding the kids. Not everyone can spend boat loads of cash on over priced car parts being sold these days. Some guys want to be in this hobby for the pleasure of owning one of these special cars, and may not be able to spend $20,000 for an engine block. I have way more respect for those guys, than the guys trying to hold them hostage, just because they have their original block, or trans. https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Re: 1969 COPO 427 MN Block
 

Obviously it depends on how much money you already have invested in your COPO car if it's worth paying $x amount for the original motor, but it's also a factor if you just don't have the financial resources to purchase it. I don't think $28K is crazy for the original VIN 427 for a COPO car, but I can tell you I don't have $28K sitting around or even the resources of getting that money without selling something.

Re: 1969 COPO 427 MN Block
 

I will repeat the same thing I said before,
WOULD YOU SPEND .10 CENTS TO MAKE 10 DOLLARS??
That copo car you have needs to have its original enjine
buy it and prosper
https://www.yenko.net/ubbthreads/imag...lins/beers.gif
PJ

Re: 1969 COPO 427 MN Block
 

Are you saying this COPO would be worth 280K more with its original engine? That would be 28K to make 280K.


Jason

Re: 1969 COPO 427 MN Block
 

[ QUOTE ]
WOULD YOU SPEND .10 CENTS TO MAKE 10 DOLLARS??

[/ QUOTE ]
That's *assuming* the car will be sold...if the owner never plans to sell, then the original engine is only *icing* on their COPO cake.

[ QUOTE ]
I also think that if someone owns a COPO car they could afford the motor.

[/ QUOTE ]
This is also *assuming* the owner bought the car in todays market, and has a tidy sum of expendible cash...what about the guy that was lucky enough to buy a COPO car years and years ago when all folks cared about was that it was a Camaro and no one knew any better? He may just have a few thousand dollars in the car over the years, and now someone is doing him a favor and offering the original engine at tens of thousands of dollars?

(no finger pointing intended, just hypothetical)

Re: 1969 COPO 427 MN Block
 

[ QUOTE ]
Not everyone can spend boat loads of cash on over priced car parts being sold these days.

[/ QUOTE ] I wouldnt consider 12K[or 20K for that matter] for THE original rebuilt MN motor to my car "boatloads" of cash, when im asking 275K for it wothout the right motor. Remember there would never be "overpriced parts" if there werent overpriced cars...

Re: 1969 COPO 427 MN Block
 

i would rather be looking at it,,, then for it

Re: 1969 COPO 427 MN Block
 

[ QUOTE ]
Why call these guys cheap? Perhaps they have have other things that they need to spend their hard earned cash on, like paying a mortgage, heating the house, taking care of a patent, or maybe even feeding the kids. Not everyone can spend boat loads of cash on over priced car parts being sold these days. Some guys want to be in this hobby for the pleasure of owning one of these special cars, and may not be able to spend $20,000 for an engine block. I have way more respect for those guys, than the guys trying to hold them hostage, just because they have their original block, or trans. https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

[/ QUOTE ]

Sorry to use the term "cheap" for lack of a better term... what should I have called it? https://www.yenko.net/ubbthreads/imag...lins/dunno.gif I wasn't referring to this particular situation because I know nothing about it.... I too would balk at $28k for the original motor - especially if there's a premium (possibly a ransom) being asked by the seller. There's a point (a price) when that's not realistic, even if you're Donald Trump.

I aplaud anyone for hanging onto a good car if they can, but a good car also deserves a certain level of respect (like being reunited with its original components when the opportunity presents itself). We all cringe when a guy tries to restore a good rare car with poor quality parts and poor workmanship and actually does more bad than good. It's not for any of us to to say whether he's right or wrong to do what he does with his car...

Re: 1969 COPO 427 MN Block
 

[ QUOTE ]
Are you saying this COPO would be worth 280K more with its original engine? That would be 28K to make 280K.


Jason

[/ QUOTE ]

I think at the rate of $.10 to $10.00 would be the ratio of $28,000 to $2.8 Million.

Re: 1969 COPO 427 MN Block
 

You're absolutely right, I was thinking it was a dollar to make 10.



Jason https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: 1969 COPO 427 MN Block
 

That block was cast 1 week before mine, assembled 1 1/2 month before mine and my partial VIN is 19N661xxx.
I guess they were just not machined, nor assembled, in the same order as they were cast.

Re: 1969 COPO 427 MN Block
 

2 of the May 69 pad stamped motors i had were cast Dec 68 and Jan 69..A third May stamp was cast April 22 69. A Jan stamped pad[TO128MN] had a dec 68 casting.

Re: 1969 COPO 427 MN Block
 

Chuck, I sent you a PM...

Re: 1969 COPO 427 MN Block
 

I see this seller ended the auction early. Anyone know who had it for sale or if he sold it on the side??

Re: 1969 COPO 427 MN Block
 

Looks like the deal fell through and it is for sale on ebay again.

http://cgi.ebay.com/ebaymotors/ws/eBayIS...em=250245642186

Re: 1969 COPO 427 MN Block
 

-----Is the one picture of the side of the block by the oil filter a picture of the repaired damage??? The picture is bad but the damage appears substantial........Bill S