Machining Pic's and Video's
 

I was walking thru the Shop today and there was a lot of neat "Stuff" going on so I thought I would Post some Pic's and Video's of things we are making.....If anyone has any Interest in this area, I can Post some Pic's of Machines we build also......The first set shows some various Prototype Stainless Steel Inlet and Outlet Ports that will eventually be made as Cast parts.....These Parts aren't finished as of yet.....the Pic's just show method of Manufacture (But...the Parts have to be Delivered on Friday)

http://i13.photobucket.com/albums/a2...s/DSC08671.jpg

http://i13.photobucket.com/albums/a2...s/DSC08672.jpg

http://i13.photobucket.com/albums/a2...s/DSC08673.jpg

Ken

Re: Machining Pic's and Video's
 

Video of Machine "Whittling" away on those parts

http://i13.photobucket.com/albums/a2...h_MOV08687.jpg

Ken

Re: Machining Pic's and Video's
 

Here's a Video of our New Haas Drilling (8) 1" holes thru 5/8 Stainless Flanges in 1 minute and 40 seconds.......It has Thru splindle coolant that go's right thru the Carbide Indexable Drill.........Pretty Cool

http://i13.photobucket.com/albums/a2...h_MOV08669.jpg

Ken

Re: Machining Pic's and Video's
 

Then we have the "Old" Muscle Machine for removing lot's of material.......3/8 cut in video


http://i13.photobucket.com/albums/a2...h_MOV08670.jpg

Ken

Re: Machining Pic's and Video's
 

Some more Flanges and Inlet Connectors

http://i13.photobucket.com/albums/a2...s/DSC08686.jpg

http://i13.photobucket.com/albums/a2...s/DSC08693.jpg

http://i13.photobucket.com/albums/a2...s/DSC08694.jpg

http://i13.photobucket.com/albums/a2...s/DSC08695.jpg

http://i13.photobucket.com/albums/a2...s/DSC08696.jpg

Ken

Re: Machining Pic's and Video's
 

Here's a Fixture we are making for cutting 6" dia 90 degree Stainless Elbows to Exactly to 60 dergees......Pic's and Video

http://i13.photobucket.com/albums/a2...h_MOV08679.jpg

http://i13.photobucket.com/albums/a2...h_MOV08688.jpg
http://i13.photobucket.com/albums/a2...s/DSC08691.jpg

http://i13.photobucket.com/albums/a2...s/DSC08692.jpg

http://i13.photobucket.com/albums/a2...s/DSC08690.jpg

Ken

Re: Machining Pic's and Video's
 

Here's a Transmission Housing for a Machine we are building.....Milled from Solid Bar Stock

http://i13.photobucket.com/albums/a2...s/DSC08685.jpg


Ken

Re: Machining Pic's and Video's
 

What's next; a 640" Aluminum Qualitek big block? https://www.yenko.net/ubbthreads/imag...ns/naughty.gif https://www.yenko.net/ubbthreads/imag...ns/worship.gif

https://www.yenko.net/ubbthreads/imag...iggthumpup.gif https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

Re: Machining Pic's and Video's
 

That is totally cool stuff! I miss the drilling/routing/cad stuff... https://www.yenko.net/ubbthreads/imag...lins/frown.gif

Re: Machining Pic's and Video's
 

Fascinating Ken, just fascinating!!! https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

Re: Machining Pic's and Video's
 

There is no money in that business. Not sure why you bother.

Re: Machining Pic's and Video's
 

[ QUOTE ]
There is no money in that business. Not sure why you bother.

[/ QUOTE ]


Ha!!!.....You Dope!!......"I" get $25 Dollars a week allowance whether I need it or Not!!!!.......What else could a Guy ask for.......Plenty O'Dough

https://www.yenko.net/ubbthreads/imag...mlins/flag.gif

Re: Machining Pic's and Video's
 

Cools stuff! I could sit for several more hours and look at this stuff like we did last time. Never boring. https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

Re: Machining Pic's and Video's
 

Sounds like crickets

Re: Machining Pic's and Video's
 

That place makes nice calenders too.
[image]http://i79.photobucket.com/albums/j1...21-08_1506.jpg[/image]

Re: Machining Pic's and Video's
 

[ QUOTE ]
That place makes nice calenders too.
[image]http://i79.photobucket.com/albums/j1...21-08_1506.jpg[/image]

[/ QUOTE ]


Hmmmm....that doesn't look like Jamaica? https://www.yenko.net/ubbthreads/imag...mlins/hmmm.gif https://www.yenko.net/ubbthreads/imag...lins/dunno.gif https://www.yenko.net/ubbthreads/imag...ins/tongue.gif https://www.yenko.net/ubbthreads/imag...mlins/grin.gif

Re: Machining Pic's and Video's
 

Thanks for the pics. I love this type of stuff, well then again I should. I see it every day! I'd love to share some pics, but I think I might get "shot" for leaking confidential info. https://www.yenko.net/ubbthreads/imag...lins/blush.gif


Steve https://www.yenko.net/ubbthreads/imag...mlins/flag.gif

Re: Machining Pic's and Video's
 

Here are Todays pic's....First pic is how the part looked yesterday and the second is today....

http://i13.photobucket.com/albums/a2...s/DSC08674.jpg

http://i13.photobucket.com/albums/a2...s/DSC08698.jpg

http://i13.photobucket.com/albums/a2...s/DSC08697.jpg

Ken

Re: Machining Pic's and Video's
 

Next Part.....Same thing ...Yesterday and today

http://i13.photobucket.com/albums/a2...s/DSC08673.jpg

http://i13.photobucket.com/albums/a2...s/DSC08701.jpg

http://i13.photobucket.com/albums/a2...s/DSC08699.jpg

http://i13.photobucket.com/albums/a2...s/DSC08700.jpg

Ken

Re: Machining Pic's and Video's
 

Sorta reminds me of some of the components I worked with in the aerospace industry.

Cool stuff. https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Eric

Re: Machining Pic's and Video's
 

Looks like billet American flag holders https://www.yenko.net/ubbthreads/imag...mlins/flag.gif

I agree...cool stuff! https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: Machining Pic's and Video's
 

It's even more impressive when you hear the tolerances they can hold. Like Rick, I could watch this kind of stuff endlessly. Good thing I don't have any room or money; I'd have one in my garage just to play with! Pretty expensive therapy! https://www.yenko.net/ubbthreads/imag...lins/crazy.gif

Re: Machining Pic's and Video's
 

Looks real good Ken. A great operation! https://www.yenko.net/ubbthreads/imag...ns/scholar.gif https://www.yenko.net/ubbthreads/imag...ns/worship.gif

Re: Machining Pic's and Video's
 

Here's a 2 Station Machine we built (can't go into specific's), But, it has a T.V. cameras built into it that actually look at the part and the computer figures where eveything is and then the machine performs it's function......Pretty Cool

http://i13.photobucket.com/albums/a2...e/DSC07958.jpg

http://i13.photobucket.com/albums/a2...e/DSC07960.jpg

Ken

Re: Machining Pic's and Video's
 

[ QUOTE ]
Here's a 2 Station Machine we built (can't go into specific's)....

[/ QUOTE ]

I can.......but then you would have to shoot me..... https://www.yenko.net/ubbthreads/imag...ns/naughty.gif Pretty cool machine to say the least and amazing what functions it can do. I think what impressed me the most was the workmanship in making the machine. Nicer detail than in some of your cars! You have some good people working there especially your sons and secretary.....