![]() |
1968 z-28??
I'm going to look at a 68 z this weekend. No paper work. Not orginal motor. Early car Nov. has 302 emb on front fenders. 12 bolt 373 gears. orginal 4-speed. power disk. What else should I look at to decide it's one?? https://www.yenko.net/ubbthreads/imag...lins/dunno.gif
|
Re: 1968 z-28??
Single fuel line, it should have 4 piston disc brakes, tire inflation sticker in glove compartment that says 15x6 wheels, High redline tach.
|
Re: 1968 z-28??
DF Coded 15" Rallys would be a good Clue, 4 Leaf Springs, Hi-Red line Tach is Z28 or L78.
|
Re: 1968 z-28??
All 68 Camaros had a single fuel line. Two fuel lines started in 69.
Doesn't necessarily have a tach, that was an option. |
Re: 1968 z-28??
Fast ratio steering box plus fast ratio steering arms.Not sure of part #s. A lot of early Zs had the brake proportioning block mounted on the drivers side frame rail.This only came on disc brake cars.
|
Re: 1968 z-28??
It has the high rpm tach. I will check the glove box. Thanks Guys https://www.yenko.net/ubbthreads/imag...iggthumpup.gif
|
Re: 1968 z-28??
[ QUOTE ]
Fast ratio steering box plus fast ratio steering arms.Not sure of part #s. A lot of early Zs had the brake proportioning block mounted on the drivers side frame rail.This only came on disc brake cars. [/ QUOTE ] Are you sure about that? I used to own a 1968 SS/RS 396 that had the finned drums up front and it had the block on the driver's side frame rail. |
Re: 1968 z-28??
What is this car worth?? Very nice correct car.
|
Re: 1968 z-28??
The car is silver with black stripes.
|
Re: 1968 z-28??
[ QUOTE ]
[ QUOTE ] Fast ratio steering box plus fast ratio steering arms.Not sure of part #s. A lot of early Zs had the brake proportioning block mounted on the drivers side frame rail.This only came on disc brake cars. [/ QUOTE ] Are you sure about that? I used to own a 1968 SS/RS 396 that had the finned drums up front and it had the block on the driver's side frame rail. [/ QUOTE ] My 68 RS 327 with drum brakes also has it |
Re: 1968 z-28??
[ QUOTE ]
What is this car worth?? Very nice correct car. [/ QUOTE ]Kim, I would be emailing/calling Jerry MacNeish about the 68 Z's. Maybe even Steve Shauger. Sounds like a nice car. Sam |
Re: 1968 z-28??
Howie don't you have enough to do already? https://www.yenko.net/ubbthreads/imag...mlins/hmmm.gif Did you check to see if this one had any floorpans? I know, maybe you found FLIPPER again. https://www.yenko.net/ubbthreads/imag...mlins/grin.gif
Joe |
Re: 1968 z-28??
[ QUOTE ]
Did you check to see if this one had any floorpans? https://www.yenko.net/ubbthreads/imag...mlins/grin.gif Joe [/ QUOTE ] If that's a reference to the 67Z, Joe, it DOES have floorpans. There just still in my shed! https://www.yenko.net/ubbthreads/imag...mlins/haha.gif Dave |
Re: 1968 z-28??
Hah I looking at the for friend of mine. As usual run your mouth before you know what your talking about!! https://www.yenko.net/ubbthreads/imag...mlins/haha.gif https://www.yenko.net/ubbthreads/imag...mlins/haha.gif https://www.yenko.net/ubbthreads/imag...s/rolleyes.gif
|
Re: 1968 z-28??
If that's a reference to the 67Z, Joe, it DOES have floorpans. There just still in my shed! https://www.yenko.net/ubbthreads/imag...mlins/haha.gif Dave [/ QUOTE ] Thats O.K. At least he'll have one car thats the right shade of red. https://www.yenko.net/ubbthreads/imag...lins/blush.gif Joe |
Re: 1968 z-28??
I think it's about the color of your hair!! https://www.yenko.net/ubbthreads/imag...emlins/eek.gif https://www.yenko.net/ubbthreads/imag...mlins/haha.gif
|
All times are GMT. The time now is 12:03 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.