1969 chevelle tow tabs
 

looking for a pair of nmw or lakewood bolt on tow tabs for a 69 chevelle. i have a pair that i purchased that came off a 70 but they don't fit. thanx mike

Re: 1969 chevelle tow tabs
 

I think I have a set...but they are a little wierd looking when you place them up to the car....for some reason they dont really line up where the sheet says they do and you will have to drill some different holes....let me see if i can find them...I never used them

Re: 1969 chevelle tow tabs
 

thanx belair62,
are you sure they are foe a 69? the guy i purchased mine from said that they were pulled of a 1970 chevelle. naturally he told me that all 68-72 chevelle tabs were the same. after 2 hours or so there is no way i can see them fitting. thanx again mike

Re: 1969 chevelle tow tabs
 

Mike...I just got a note from a friend who reminded me I gave them to him a couple years ago !! He's right because I haven't tripped over them in a while !!!! Sorry about that. I know when I fit them up to see how they would fit they sucked and I think I would have had to drill a new hole in the bumper brace which I didn't want to do...

Re: 1969 chevelle tow tabs
 

mucho thanks anyway belair! the hunt continues mike

Re: 1969 chevelle tow tabs
 

The 69 brackets are different then the 70 ones... I have a set of 69 brackets but Im not getting rid of them, if you would like a picture I can get you one... The 70 brackets were two pieces bolted together... Mark

Re: 1969 chevelle tow tabs
 

thanx mark,
maybe if i can get a picture i will know a little better what to look for. mike

Re: 1969 chevelle tow tabs
 

I'll take a closeup picture tomorrow. them are still mounted on the bumper i pulled off my car.
http://www.dragracers.org/my-toys/69-chevellesm.jpg

Re: 1969 chevelle tow tabs
 

thank you!! the picture looks awesome, what i can make out of it!! mike

Re: 1969 chevelle tow tabs
 

here are the closeups of the old bumper

http://www.joeyg.com/1.jpg

http://www.joeyg.com/2.jpg

http://www.joeyg.com/3.jpg

http://www.joeyg.com/4.jpg

Re: 1969 chevelle tow tabs
 

One of 311... is that a Daytona Yellow L89 in the back ground?

Re: 1969 chevelle tow tabs
 

thank you very much for taking the time to do that. it appears the ones i have are 2 piece and different. i'm assuming the bar that extends rearward was bolted to the frame? holes must have had to be drilled? thanx again mike

Re: 1969 chevelle tow tabs
 

[ QUOTE ]
One of 311... is that a Daytona Yellow L89 in the back ground?

[/ QUOTE ]
yes it is, The "Soul Survivor" Camaro https://www.yenko.net/ubbthreads/imag...mlins/wink.gif

Re: 1969 chevelle tow tabs
 

[ QUOTE ]
looking for a pair of nmw or lakewood bolt on tow tabs for a 69 chevelle. i have a pair that i purchased that came off a 70 but they don't fit. thanx mike

[/ QUOTE ]
Mike sorry it took me so long to post these pictures but better late then never...
http://i7.photobucket.com/albums/y29...5/DSC04894.jpg
http://i7.photobucket.com/albums/y29...5/DSC04895.jpg
http://i7.photobucket.com/albums/y29...5/DSC04896.jpg
http://i7.photobucket.com/albums/y29...5/DSC04897.jpg
http://i7.photobucket.com/albums/y29...5/DSC04898.jpg