68 NOS outer top of door stailess fuzzies wanted
 

Need outer window fuzzies for top of door stainless trim, want NOS, RePop repro not working for me
[email protected]

Re: 68 NOS outer top of door stailess fuzzies wanted
 

For what car?
I have them for a Chevelle.

Re: 68 NOS outer top of door stailess fuzzies wanted
 

For a Camaro.

Re: 68 NOS outer top of door stailess fuzzies wanted
 

Do you have part #'s ? Are you talking about the wide stainless ?

Re: 68 NOS outer top of door stailess fuzzies wanted
 

I think he's just looking for a set of "round bead" NOS GM windowfelts, not the 68 lower window trim.

Re: 68 NOS outer top of door stailess fuzzies wanted
 

Outer Window fuzzie Part #7729998 for either door,and shared on the 69 Camaro too.

Re: 68 NOS outer top of door stailess fuzzies wanted
 

Anybody know what they are worth ?

Re: 68 NOS outer top of door stailess fuzzies wanted
 

Still no opinion on what they are worth ?

Re: 68 NOS outer top of door stailess fuzzies wanted
 

$250ish

Re: 68 NOS outer top of door stailess fuzzies wanted
 

Yes for the wide door trim stainless, top outside of door

Re: 68 NOS outer top of door stailess fuzzies wanted
 

Upper door trim, wide stainless on outside of door, next to glass outside

Re: 68 NOS outer top of door stailess fuzzies wanted
 

Once again...What are they worth bcause I think I have some NOS..

Re: 68 NOS outer top of door stailess fuzzies wanted
 

If you have the ones that go on the optional RS top of door wide outer stainless, NOS, I would go $200 for both sides. These are on outer side of glass.

Re: 68 NOS outer top of door stailess fuzzies wanted
 

I looked but I don't have them NOS. I have one door used and both 1/4 used. I do have a pair of the #7729998 door fuzzies NOS I will sell for 250.00 plus shipping...

Re: 68 NOS outer top of door stailess fuzzies wanted
 

Thanks for reply. So far I've made Repops repro work, not near as good as NOS. Still looking for NOS. Punched tabs and mounting holes on Repops in wrong location, backing channel made of aluminum versus steel NOS, barely adequate type stuff