1970 1/2 Hugger Z28 4 speed
 

Restored and Very Correct M21 with C00 Rear. <font color="orange"> Hugger </font> /White Stripes and Black interior. Prior 2 owners are club members.

$50,000.00

Re: 1970 1/2 Hugger Z28 4 speed
 

Ok I'll bite. Please point us to pictures and more info.

Thanks.

Rick

Re: 1970 1/2 Hugger Z28 4 speed
 

[ QUOTE ]
Restored and Very Correct M21 with C00 Rear. <font color="orange"> Hugger </font> / <font color="white"> White Stripes </font> and Black interior. Prior 2 owners are club members.
$50,000.00

[/ QUOTE ]
If your gonna do it, do it right https://www.yenko.net/ubbthreads/imag...ns/naughty.gif Highlight above for blue stripe option https://www.yenko.net/ubbthreads/imag...mlins/haha.gif

Re: 1970 1/2 Hugger Z28 4 speed
 

Very tricky Sam. Now, where are the pictures? Any docs? https://www.yenko.net/ubbthreads/imag...ins/tongue.gif

Re: 1970 1/2 Hugger Z28 4 speed
 

Ditto, Any Docs and Pics?
Is car in Illinois?

Re: 1970 1/2 Hugger Z28 4 speed
 

The car is in Illinios. There is no build sheet, or protecto plate or any other dealer docs.

Re: 1970 1/2 Hugger Z28 4 speed
 

It is a beautiful car. Nice match for your 69 Alan. https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

http://img.photobucket.com/albums/v3...o/P5010063.jpg

Re: 1970 1/2 Hugger Z28 4 speed
 

That's nice. I like it.

Re: 1970 1/2 Hugger Z28 4 speed
 

Ok, where is the 15 page writeup, 50-100 pictures and other information that describes why this nice looking car with no paperwork is worth $50,000????? https://www.yenko.net/ubbthreads/imag...lins/dunno.gif https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Not to offend but you have to come up with a little more then a one liner and a picture. https://www.yenko.net/ubbthreads/imag...thumbsdown.gif

Rick H.

Re: 1970 1/2 Hugger Z28 4 speed
 

https://www.yenko.net/ubbthreads/imag...mlins/haha.gif https://www.yenko.net/ubbthreads/imag...mlins/haha.gif...he's not that good at typing....if you are interested you should PM him...he has a write up a mile long from one of the previous owners.

Re: 1970 1/2 Hugger Z28 4 speed
 

[ QUOTE ]
https://www.yenko.net/ubbthreads/imag...mlins/haha.gif https://www.yenko.net/ubbthreads/imag...mlins/haha.gif...he's not that good at typing....if you are interested you should PM him...he has a write up a mile long from one of the previous owners.

[/ QUOTE ]

I got the same problem but I learned to cut and paste. Cut and paste that sucker. https://www.yenko.net/ubbthreads/imag...ns/naughty.gif https://www.yenko.net/ubbthreads/imag...ns/naughty.gif

Rick H.

Re: 1970 1/2 Hugger Z28 4 speed
 

Stefano,

Your PM box is full.

Please send me a copy of the detailed write up that Belair mentioned.

Thanks.

Re: 1970 1/2 Hugger Z28 4 speed
 

Ok good advise. What is cut and paste?

Re: 1970 1/2 Hugger Z28 4 speed
 

Stefano wants to do his own Bruce !! You guys are quick !

Re: 1970 1/2 Hugger Z28 4 speed
 

Acckkk, I'm blind from trying to read the writeup! https://www.yenko.net/ubbthreads/imag...emlins/ooo.gif But that is a sweet looking Z. I prefer the short spoiler myself.

Re: 1970 1/2 Hugger Z28 4 speed
 

[ QUOTE ]
Acckkk, I'm blind from trying to read the writeup! https://www.yenko.net/ubbthreads/imag...emlins/ooo.gif But that is a sweet looking Z. I prefer the short spoiler myself.

[/ QUOTE ]


Isn't the ALL CAPS write up a Kenny Pascoe trademark? https://www.yenko.net/ubbthreads/imag...mlins/grin.gif

It's definitely a nice car!

Re: 1970 1/2 Hugger Z28 4 speed
 

It has the COPO delete spoiler option https://www.yenko.net/ubbthreads/imag...ins/tongue.gif The author of the write up does such a great job I hope he doesn't mind me using his material. It would have taken me a week to type that info out. However, I would have been case sensative.

Re: 1970 1/2 Hugger Z28 4 speed
 

[ QUOTE ]
Stefano wants to do his own Bruce !! You guys are quick !

[/ QUOTE ]

Sorry Stefano...just trying to help. https://www.yenko.net/ubbthreads/imag...lins/frown.gif

Bob, It's https://www.yenko.net/ubbthreads/imag...mlins/cool.gif!

Re: 1970 1/2 Hugger Z28 4 speed
 

I can use all the help I can get!

Re: 1970 1/2 Hugger Z28 4 speed
 

[ QUOTE ]
It has the COPO delete spoiler option https://www.yenko.net/ubbthreads/imag...ins/tongue.gif The author of the write up does such a great job I hope he doesn't mind me using his material. It would have taken me a week to type that info out. However, I would have been case sensative.

[/ QUOTE ]

Stefano:

COPO Delete?? WOW....Boy that must be a rare car then? I will bet a "one of one". https://www.yenko.net/ubbthreads/imag...ns/naughty.gif

Join the SYC Become a member!! Get your Stars!!

Phil

Re: 1970 1/2 Hugger Z28 4 speed
 

Can somebody point me to the pictures? After ready the write up my eyes refuse to focus. Ughhhh. https://www.yenko.net/ubbthreads/imag...emlins/eek.gif

Not original tranny, wrong alternator and lack of paperwork. Hmm. $50k? https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Still a nice car.

Rick H.

Re: 1970 1/2 Hugger Z28 4 speed
 

Stefano...I removed the old ad for the car..it's a year old or more and his number is still on it....you should write up your own or edit it ya lazy bum !!!

Re: 1970 1/2 Hugger Z28 4 speed
 

Phil,
I just couldn't resist https://www.yenko.net/ubbthreads/imag...mlins/grin.gif

Re: 1970 1/2 Hugger Z28 4 speed
 

For the eyes (with the help of Microsoft Word):

With the 1969 z/28 Camaros now bringing in excess of 60,000.00 dollars for a single 4 barrel version this leaves little opportunity for the general public to be able to purchase one of these cars before collectors swoop down and buy them to ad to their Million Dollar collections. An alternative to this problem is to look ahead at the muscle cars that are affordable today and purchase them as investments since they will surely follow the pace that for example, the 69 Camaro is setting. one such example is the stunning 1970 z/28 camaro I have listed below. This car without a doubt is already beginning to follow the path of higher value camaros. In the next year, if not in the next several months, you will see these 70 version muscle cars begin to take off. I have posted over 90 high resolution photos of this car so please be patient when waiting for them to download. It will be well worth your wait. This Camaro was a full frame off restoration a little over 2 years ago. The body has all original sheet metal with the exception of the nos gm rear quarters which were installed professionally. The Camaro’s arrow straight body was painted in its original hugger orange and white stripe color and shot in base coat clear coat. After being wet sanded and buffed, you can see by the pictures just how spectacular this paint came out. It has a mirror like finish. Without a doubt it blows away any factory paint. All date coded tinted glass was then installed along with all original trim and nos trim where needed. The front and rear bumpers were triple chrome plated and reinstalled. Front and rear spoilers were installed next along with the firestone wide oval tires that were mounted on factory z/28 wheels. These wheels have nos trim rings as well as very rare nos center caps. With the grill and badges all installed the exterior was complete I think you will agree this z/28 exterior is awesome. The black standard interior, as you can see, is in very good condition with no tears in the upholstery or door panels. Several items have been replaced in this interior including the door panels, seat covers and carpet. All of the gauges still work and this interior even has a nos ash tray. The odometer shows 90k but the true mileage is unknown. Miles since the restoration is approx. 500 miles. This interior has the optional tilt wheel, power steering, power disc brakes, gauge package and trunk light. Speaking of the trunk it is like new as you can see by the photos below it also has the correct spare and jack assembly. Look close at the door jambs since they are as slick as the exterior paint. Also notice the nos trunk rubber and nos door and roof rubber. When ever nos parts were available they were used on this restoration. Under the hood you will find and engine compartment detailed for show. The 350 cubic inch engine is original to this Z/28 carrying a block casting # 3970010, a casting date of A 15 0, engine id # V0212CTB as well as the VIN 10N516392. The cylinder heads are #3927186 and dated B70. The carb is # 4555 list. The distributor # is 1112019. The fan is # 3947772 and dated B70. The exhaust manifold #’s are left-3942527 and right-3946826. Last but not least is the alternator which is # 1100843. You can see that the correct smog is in place on this Z/28 as well as the original dual snorkel air filter. This engine compartment is still very impressive. As for the transmission, the original m21 four speed is long gone, but a date coded Muncie M21 just like the original is now in its place. The 12 bolt rear is original to this Z/28 carrying an id of COO 0215 G 1 which spins a set of 4:10 gears. As you can see, the original engine and rear remain with this car, with the trans being a date coded correct unit. The trim tag under the hood reads as follows: first line ST70 12487 NOR 235257 BDY. The second line reads TR 711 65 65 PNT. The third line reads 03A Z28.10 . Last on this incredible Z/28 is the undercarriage. While on the rotisserie, the floors were stripped and 2 repairs were professionally welded into place on the rear floor pans. These repairs you can see in the pictures below. Once the floors were finished, a factory red oxide was applied. The entire front and rear suspension were rebuilt or replaced as needed. All new brake lines were installed, as well as an all new Gardner exhaust system. You can see that every nut and bolt was restored on this beautiful 70 Z/28 camaro and it has remained very show worthy. The reserve on this car is very reasonable, whether you are looking at this car as an investment or as your new toy to take to the shows and cruise spots. If you are close enough to come and inspect this stunning car, feel free to do so or please send a third party to come and inspect it for you. Feel free to call 1-845-782-2108 or email me at [email protected] with any and all questions. Now it is you turn to step up and bid. Good luck!!!!

Re: 1970 1/2 Hugger Z28 4 speed
 

Looks like a fair car for the money.

Phil https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: 1970 1/2 Hugger Z28 4 speed
 

Stefano...if that car spent any time at Belair's house...check the rod and main bearings, QUICK!

https://www.yenko.net/ubbthreads/imag...mlins/haha.gif

Re: 1970 1/2 Hugger Z28 4 speed
 

OMG! https://www.yenko.net/ubbthreads/imag...emlins/eek.gif https://www.yenko.net/ubbthreads/imag...lins/blush.gif

Wow.... https://www.yenko.net/ubbthreads/imag...ins/tongue.gif

Re: 1970 1/2 Hugger Z28 4 speed
 

Yeah but put Stefano's number down instead of Kenny's on that write up !!! Stefano..the LV Camaro 5/50 warranty is tranferrable...I had to get something to smoke Steves pussy Belair with the wrong manifolds

Re: 1970 1/2 Hugger Z28 4 speed *DELETED*
 

Post deleted by Belair62

Re: 1970 1/2 Hugger Z28 4 speed
 

No problem as long as we're discussing some cool cars. I had a '64 409/425 4 speed Rag top back in HS. It was stock but ran very strong.

Re: 1970 1/2 Hugger Z28 4 speed
 

Ahhhh...the power of a Moderator https://www.yenko.net/ubbthreads/imag...mlins/haha.gif https://www.yenko.net/ubbthreads/imag...mlins/haha.gif

Re: 1970 1/2 Hugger Z28 4 speed
 

Bob... you sold the Z?

Re: 1970 1/2 Hugger Z28 4 speed
 

Bruce...did you say something https://www.yenko.net/ubbthreads/imag...mlins/haha.gif https://www.yenko.net/ubbthreads/imag...mlins/haha.gif

Re: 1970 1/2 Hugger Z28 4 speed
 

Oh yea....? Bob you are the coolest person in the entire world and I want to be like you .

Re: 1970 1/2 Hugger Z28 4 speed
 

Gosh Bruce...thanks buddy...I will send you an autograph or somthing if I can. https://www.yenko.net/ubbthreads/imag...mlins/haha.gif https://www.yenko.net/ubbthreads/imag...mlins/haha.gif https://www.yenko.net/ubbthreads/imag...mlins/haha.gif

Re: 1970 1/2 Hugger Z28 4 speed
 

Soooooooooo, what's the story with the 1970 1/2 Hugger Z/28 4 speed??? Hmmmmm?? https://www.yenko.net/ubbthreads/imag...lins/dunno.gif https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

I think that's what we started to talk about. I plum forgit now. https://www.yenko.net/ubbthreads/imag...s/confused.gif https://www.yenko.net/ubbthreads/imag...s/confused.gif

Rick H.

Re: 1970 1/2 Hugger Z28 4 speed
 

Stefano...looks like you have an interested buyer here...what is it that you want to know Rick...you should probably go look at it...I thnk you will like it.

Re: 1970 1/2 Hugger Z28 4 speed
 

I think rick just likes to be a devil's advocate. https://www.yenko.net/ubbthreads/imag...lins/smile.gif

Re: 1970 1/2 Hugger Z28 4 speed
 

Oh...well cancel the flight then !!!

Re: 1970 1/2 Hugger Z28 4 speed
 

[ QUOTE ]
Oh...well [edited by DarrenX33 and Bill Pritchard]!!!

[/ QUOTE ]

https://www.yenko.net/ubbthreads/imag...elairSucks.gif


BTW...I like the burnished brown...a lot! https://www.yenko.net/ubbthreads/imag...lins/beers.gif https://www.yenko.net/ubbthreads/imag...mlins/grin.gif