Looking for a project car
 

Prefer something western/southwestern (i.e. little to no rust), or a lucky midwest survivor/transplant. Aesthetics don't matter, as long as it's solid. Engine/trans/rear don't matter either. Interior--as long as the basics are there, but the nicer the better.

Nothing made of unobtanium please, my budget is limited to the ~10K range. https://www.yenko.net/ubbthreads/imag...lins/smile.gif

Cars of interest:

1) FIRST choice is a `67 Chevelle. Prefer to avoid legit SS cars unless the price is reasonable ("reasonable Super Sport" = oxymoron https://www.yenko.net/ubbthreads/imag...lins/smirk.gif ). 2dr HT only, no wagons, 4 doors or sedans. Will consider `66 models, but heavily prefer the `67.

2) `67-73 Camaro.

3) `65-`66 B-body GM (2 door only, no wagons or 4-doors. Sedans OK)

4) `57 Chevy 2dr HT (sedans considered).

5) `67 Mustang fastback

6) `65 Cutlass

7) Others???...what do you have?

Already been scouring e(vil)Bay to no avail. I'm convinced 80% of the sellers on e(vil)Bay are on dope...and if they ain't, well, then they need to be! https://www.yenko.net/ubbthreads/imag...mlins/wink.gif Made more phone calls than I can count, and have been on more snipe hunts locally than I'll ever care to admit. I have a 2' stack of classic car trader magazines piling up, and yet, after all this, I still haven't found the "right" car. No, I'm not being too picky, I just know what I want and I know I'll eventually find it. https://www.yenko.net/ubbthreads/imag...mlins/grin.gif

Any help/leads would be greatly appreciated. https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Eric
[email protected]

-or-

(937) 836-5927.

Re: Looking for a project car
 

I think you should be able to find something cool to restore in that price range...and BTW...welcome back !!!...Look up user GMSports in the user directory...Steve usually has a few candidates out on California...

Re: Looking for a project car
 

Welcome Back Eric.....
I hope you find what you are looking for.
BTW, the carb works GREAT https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: Looking for a project car
 

Wow. You have no idea how good it feels to be welcomed back here. Thank you.

Bob, is that http://www.gmsports.com/ ? If so, I browse their site several times a week looking for updates. I guess I'll just have to give them a call Monday.

Mark;

Thanks! I'm glad you're happy with the carb. https://www.yenko.net/ubbthreads/imag...lins/smile.gif

Speaking of which, I guess it's time to let the cat out of the bag. I'm back in the carb business again. Just getting set back up, should be ready to roll by the end of next week or thereabouts.

As before, ANYTHING I can do to help out sYc members, just let me know.

Man, it feels good to be back. https://www.yenko.net/ubbthreads/imag...lins/smile.gif

Eric

Re: Looking for a project car
 

Call Steve Marini out there and tell him what you are looking for....

Re: Looking for a project car
 

Not sure if it qualifies.. https://www.yenko.net/ubbthreads/show.../page/0#158655

Re: Looking for a project car
 

[ QUOTE ]
Not sure if it qualifies.. https://www.yenko.net/ubbthreads/show.../page/0#158655

[/ QUOTE ]

That is so close it hurts. If it was one of the abovementioned body styles, I'd be on it like ugly on an ape. Crying shame about the door https://www.yenko.net/ubbthreads/imag...lins/frown.gif

I'll call GM sports and see what they have monday.

FWIW...if this were a `67, I'd be making a b-line to CA monday to pick up my "new" car. https://www.yenko.net/ubbthreads/imag...mlins/grin.gif

Re: Looking for a project car
 

66's are cool too.....black plate 66....hmmm...thats gotta be tough to pass up Eric !

Re: Looking for a project car
 

[ QUOTE ]
66's are cool too.....black plate 66....hmmm...thats gotta be tough to pass up Eric !

[/ QUOTE ]

second that..it looks pretty clean, as long as there isnt any surprises under the new paint.

Re: Looking for a project car
 

[ QUOTE ]
66's are cool too.....black plate 66....hmmm...thats gotta be tough to pass up Eric !

[/ QUOTE ]

Oh, it IS tough to pass up...that thing's SWEET!...but if I'm gonna drop that kinda coin (which is a HUGE, likely once-in-a-lifetime deal for me), I'm gonna hold out until I find exactly what I want.

I've learned my lesson in past dealings about compromising on what I want for what's "available" at the time instead...I always lived to regret it.

There's a couple of `67's on eBay right now I'm almost tempted to jump on, but again, they're not quite what I want, and they're priced a little higher than I'd be willing to go for a project car of their caliber.

That's the thing about ebay...great if you're selling, but not-so-great if you're buying. https://www.yenko.net/ubbthreads/imag...lins/crazy.gif

Re: Looking for a project car
 

Eric, I have one for you. Sent you a pm.

Re: Looking for a project car
 

...here's a '67 chevelle malibu
http://adcache.collectorcartraderonl...5/80717505.htm
.... https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

Re: Looking for a project car
 

another one....
http://adcache.collectorcartraderonl...5/80808965.htm
https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

Re: Looking for a project car
 

Tony;

Thanks for the leads https://www.yenko.net/ubbthreads/imag...lins/smile.gif

John;

I called about the first Chevelle early last week, seller never returned my call...apparently it's been sold. If the paint on the 2nd one were different, I'd consider it.

Y'all are the best...this place rocks. https://www.yenko.net/ubbthreads/imag...mlins/grin.gif

Keep `em coming. https://www.yenko.net/ubbthreads/imag...lins/smile.gif

Eric

Re: Looking for a project car
 

Eric..Do you check www.chevelles.com classifieds?

Re: Looking for a project car
 

[ QUOTE ]
Eric..Do you check www.chevelles.com classifieds?

[/ QUOTE ]

Several times a week, along with CCTOL, eBay, camaros.net, nastyz28.com, realoldspower.com, cars-on-line.com, the ones I mentioned earlier, and last, but certainly not least, yenko.net. https://www.yenko.net/ubbthreads/imag...lins/smile.gif

I recieved an email this morning regarding a `67 SS Chevelle that may be what I'm looking for (will know more once I get more pics), but I'm still actively looking in the meantime.

Eric

Re: Looking for a project car
 

This looks like it could be a winner. May be a price stretch though. 67 Chevelle

Re: Looking for a project car
 

[ QUOTE ]
This looks like it could be a winner. May be a price stretch though. 67 Chevelle

[/ QUOTE ]

Looks like a nice car, but it is a little out of my budget.

Thanks for looking https://www.yenko.net/ubbthreads/imag...lins/smile.gif

Eric

Re: Looking for a project car
 

Welcome back Eric.

Re: Looking for a project car
 

[ QUOTE ]
Welcome back Eric.

[/ QUOTE ]

Thanks Rick.

It's good to be back. https://www.yenko.net/ubbthreads/imag...lins/smile.gif

Re: Looking for a project car
 

How about the car in my signature? 76 Motion Camaro Clone . . . lots of goodies, PM if interested. $6000 Firm

Re: Looking for a project car
 

here you go, this 67 chevelle is in my area and i know of another for sale that i have pm the number to you about thanks jp

http://portland.craigslist.org/car/98675347.html

Re: Looking for a project car
 

skierkaj;

Sounds like a neat car, just not quite what I'm looking for. https://www.yenko.net/ubbthreads/imag...lins/smile.gif

jackal;

That one popped up on TC yesterday, I emailed about it and it's out of my price range. I will check on the others re: the PM.

Thanks! https://www.yenko.net/ubbthreads/imag...lins/smile.gif

Eric

Re: Looking for a project car
 

Here is one you may be interested in that was listed in the local sale paper today. If you are interested, PM or email me and I will give you the phone number. I can check the car out if you want. I don't know if it is a clone or a real SS that is missing the correct drivetrain.
James

1966 Chevrolet Chevelle SS. New interior. Body off frame restoration. 283 Small Block. 350 turbo transmission. Must see. $10,000