![]() |
COPO/YENKO Trim Tags
1 Attachment(s)
Hi All,
I've been doing some home work for my 68 SS Camaro on the Camaro.net site. I've been told that my trim plate is differant to the "normal" plates. I was advised to talk to you guys on here for some more info. I've done a search and found the tread "1968 YENKO CAMARO VIN LIST & TRIM TAG INFO". My trim tag is the same as the 68 COPO (Yenko) Camaro trim tag listed. The car is numbers matching. How can I find out if it was a YENKO or COPO car? I've posted a pic of the Trim Tag. Thanks in advance for your help |
Re: COPO/YENKO Trim Tags
It would be interesting to see pictures of the rest of that car.
BTW, what´s your name and where do you live ? |
Re: COPO/YENKO Trim Tags
WOW nice, Hope its on this list for 68 Yenko Camaros. If it is please let us all know and tell us more about the car and post some pics of it.
https://www.yenko.net/ubbthreads/show...0/page/0#76005 This is if the cars VIN is a 124378N VIN if its a 123378N its a 6 cylinder car. Can you post the VIN as well? If you dont mind 1 = Chevrolet 2 = Camaro 4 = 8-cylinder engine 37 = coupe body 8 = 1968 model year N = Norwood, OH assembly plant 11E = Built the Fifth week of November. 68-12437 = Coupe. NOR = Built in Norwood Ohio. 726 = Custom Turquoise Bucket Seats. C-C = Car Color is Ermine White |
Re: COPO/YENKO Trim Tags
Why isn't the tag attached to the car?
|
Re: COPO/YENKO Trim Tags
No it's not on the list https://www.yenko.net/ubbthreads/imag...lins/frown.gif
The Car was purchased about 12 months ago. It was stripped in 1982 to be restored. Unfortuantely it was never finished (or started for that matter). I purchased the car in bits. I've had the body dipped and work will start on the body in the start of October. I'm currently having the front rails repaired and once finished will start assembling the front end. |
Re: COPO/YENKO Trim Tags
Next step is to check the VIN plate on the dash to the Partial VIN on the firewall by the heater blower motor and again under the cowl vents on the passenger side. If they dont match the VIN plate, something is wrong. If the Partial VINs match one on the 68 listing but not the VIN plate on the dash, I would think something is very wrong and either the car was rebodied or the CIN was replaced.
|
Re: COPO/YENKO Trim Tags
I've already done that. I've confirmed, with the help of quite a few people at Camaro.net that the car is 100% Numbers matching. The only questionable component is the Transmission. but i'm told that some export cars used "unique"codes. All other codes are correct.
I'm 99.9% sure it's complete and numbers matching but the "strange" trim plate (see above) has me curious about it's origons. |
Re: COPO/YENKO Trim Tags
Is this the same car you were talking about a year or 2 ago ???
|
Re: COPO/YENKO Trim Tags
I've been a member of Yenko.net for quite a while so it's possilbe. At that time I may not of owned the car. I was either "paying it off" or researching the purchase. I've owned it for about a year. Only in the last week have I fully researched the car. I was told buy the seller (a good family friend) it was an original SS/RS Big Block but have never been sure.
NOTE: This may help shed some light on this. Both myself and the car are in Australia. I know the car has been over here for a while but before 1982 I'm not sure where it came from. Am trying to contact the original owner. |
Re: COPO/YENKO Trim Tags
Anyone know if these tags used for export cars ?
|
Re: COPO/YENKO Trim Tags
How about posting the rear-end stamping.If you have the block and it's been decked,post the casting #,date and is it a 4 bolt main.
|
Re: COPO/YENKO Trim Tags
What's the code on the trans?Is the car an auto or 4sp https://www.yenko.net/ubbthreads/imag...s/confused.gif
|
Re: COPO/YENKO Trim Tags
I'm a little bit worried about posting all the details. I've seen quite a bit of evidence of fraud on some of these sites. Can some of you guys give me some sort of assurance that what I post cannot be duplicated or somehow sold. This might sound paranoid but I've only just found out all numbers are matching.
I have all these details and I'll be willing to post if some of the members on here could address my concerns. I look forward to your replies. |
Re: COPO/YENKO Trim Tags
[ QUOTE ]
Anyone know if these tags used for export cars ? [/ QUOTE ] I recently seen one of these tags on a 68 convertible, Talked to Rich Fields about it and he said it was probably a South American export car... |
Re: COPO/YENKO Trim Tags
I don't blame you about posting the #'s, being that the car is in Australia some dasterdly culperate would find that an easy target for a fraudulant copy.
|
Re: COPO/YENKO Trim Tags
[ QUOTE ]
I'm a little bit worried about posting all the details. I've seen quite a bit of evidence of fraud on some of these sites. Can some of you guys give me some sort of assurance that what I post cannot be duplicated or somehow sold. This might sound paranoid but I've only just found out all numbers are matching. I have all these details and I'll be willing to post if some of the members on here could address my concerns. I look forward to your replies. [/ QUOTE ] If the #'s are on the Net then it's open season to the scammers. No one can guarantee what you ask. Everyone in the World has access to this web site. |
Re: COPO/YENKO Trim Tags
Probably a good idea to investigate what you have with some of the fellas offline
|
Re: COPO/YENKO Trim Tags
I think the build date is way out of range for a 68 Yenko..BKH
|
Re: COPO/YENKO Trim Tags
Maybe because it is a export they leave off the trim tag that says it meets federal standards.
|
Re: COPO/YENKO Trim Tags
[ QUOTE ]
Maybe because it is a export they leave off the trim tag that says it meets federal standards. [/ QUOTE ] Thats what I was told, 3rd world dont care about emissions, they wouldnt care if there was glass in it, just as long as it could sleep 11 https://www.yenko.net/ubbthreads/imag...mlins/cool.gif |
Re: COPO/YENKO Trim Tags
That was known as the "Condo Conversion" RPO. https://www.yenko.net/ubbthreads/imag...mlins/haha.gif
|
Re: COPO/YENKO Trim Tags
[ QUOTE ]
That was known as the "Condo Conversion" RPO. https://www.yenko.net/ubbthreads/imag...mlins/haha.gif [/ QUOTE ] https://www.yenko.net/ubbthreads/imag...mlins/haha.gif https://www.yenko.net/ubbthreads/imag...mlins/haha.gif |
Re: COPO/YENKO Trim Tags
Yes, 68 export Camaros used that tag.
This is one of those cars. https://www.yenko.net/ubbthreads/imag...lins/smile.gif |
Re: COPO/YENKO Trim Tags
What speedo is in the car....140 or 120 MPH or KPH? I do think also its too early for the copo/yenko run??
|
All times are GMT. The time now is 03:35 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.